Magnet Firearm Holders Safety
During daylight hours I have installed a set of magnet holders for my semi in a hidden readily accessible location. These magnets, as advertised, can literally be installed anywhere and their powerful magnets will hold your firearm in place and readily accessible. The problem I just discovered that I wanted to share in the forum is the fact that when I remove the semi from the magnet and do so close to the magnet as I hold the semi in a horizontal position, the magnets are powerful enough to impact the safety lever on the semi and actually have it move from "safety" to "fire" w/o my even realizing it. If I should decide to keep a cartridge in the chamber, I now have a loaded semi that is "fire ready" w/o my immediate knowledge, unless I look at the safety position or the usual red dot indicating a "hot" gun. I intend to contact the supplier/mfgr or any others on web who offer same and mention this and perhaps they will at least include a small notice on the product warning purchasers that the best way to remove the semi from the magnet is to pull it away from magnet before sweeping it horizontally upward and near the magnet's pull, which can also pull the safety lever into a non-safety mode.