me+bored+dremel=interesting

me+bored+dremel=interesting

This is a discussion on me+bored+dremel=interesting within the Defensive Carry Guns forums, part of the Defensive Carry Discussions category; I got bored this morning, and took the dremel tool to my baby. I polished my G33 barrel to perfection! Take a look. What do ...

Page 1 of 3 123 LastLast
Results 1 to 15 of 32

Thread: me+bored+dremel=interesting

  1. #1
    Senior Member Array luvmyglock's Avatar
    Join Date
    Jan 2007
    Location
    Washington
    Posts
    641

    me+bored+dremel=interesting

    I got bored this morning, and took the dremel tool to my baby. I polished my G33 barrel to perfection! Take a look.





    What do you guys think?
    EVIL PREVAILS WHEN GOOD MEN FAIL TO ACT.


  2. #2
    Member Array Logan5's Avatar
    Join Date
    Jan 2008
    Location
    Near Area 57
    Posts
    190
    That is one immaculate looking G33!

  3. #3
    Senior Member Array luvmyglock's Avatar
    Join Date
    Jan 2007
    Location
    Washington
    Posts
    641
    Thanks! I am thinking about cheap polishing service to my friends in my spare time. I could make some money....oh..here we go again..another hobby.....
    EVIL PREVAILS WHEN GOOD MEN FAIL TO ACT.

  4. #4
    B52
    B52 is offline
    Senior Member Array B52's Avatar
    Join Date
    Nov 2007
    Location
    Anchorage, Alaska
    Posts
    684
    Looks great!

  5. #5
    Member Array TuesdayClub's Avatar
    Join Date
    Jul 2008
    Location
    CNTRLFLA
    Posts
    37
    Try it by hand...Much harder/challenging, but very rewarding--Here's a CZ50 I did by hand:




  6. #6
    1943 - 2009
    Array Captain Crunch's Avatar
    Join Date
    Dec 2004
    Location
    Montana
    Posts
    10,372
    Quote Originally Posted by luvmyglock View Post
    Thanks! I am thinking about cheap polishing service to my friends in my spare time. I could make some money....oh..here we go again..another hobby.....
    Be careful.

    This could be construed as gunsmithing by the BATFE, requiring an FFL and the obligatory record keeping.

    Not to mention the intrusion in your life by the aforementioned government agency.

    I'm just saying, that's all...

    BTW, very nice polishing job!


    When you’re wounded and left on Afghanistan’s plains,
    And the women come out to cut up what remains,
    Just roll to your rifle and blow out your brains,
    And go to your God like a soldier.

    Rudyard Kipling


    Terry

  7. #7
    Senior Member Array fatboy97's Avatar
    Join Date
    Dec 2006
    Location
    Land of 10k Lakes
    Posts
    1,082
    How long did it take to get it all nice and shiny?
    Be Observant and Be Safe.

    Current: S&W 442, Springfield XD9sc, XDm9, and Glock G26, G19, G23C,
    and SIG P226-40 TT, and Ruger GP-100, and Beretta 92FS
    Former: Taurus 92SS, SIG P220 TT, S&W 360, SIG P239-40, Ruger 22/45 MKII

  8. #8
    Senior Member Array luvmyglock's Avatar
    Join Date
    Jan 2007
    Location
    Washington
    Posts
    641
    Quote Originally Posted by fatboy97 View Post
    How long did it take to get it all nice and shiny?
    About 2 hours.
    EVIL PREVAILS WHEN GOOD MEN FAIL TO ACT.

  9. #9
    Senior Member Array luvmyglock's Avatar
    Join Date
    Jan 2007
    Location
    Washington
    Posts
    641
    Quote Originally Posted by Captain Crunch View Post
    Be careful.

    This could be construed as gunsmithing by the BATFE, requiring an FFL and the obligatory record keeping.

    Not to mention the intrusion in your life by the aforementioned government agency.

    I'm just saying, that's all...

    BTW, very nice polishing job!
    Thanks for the compliment. GREAT thought/concern on the gunsmithing end of things. The only thing that I know of concerning this issue is the ATF's definition of a "gunsmith" : D) as applied to a dealer in firearms, as defined in section 921(a)(11)(B), a person who devotes time, attention, and labor to engaging in such activity as a regular course of trade or business with the principal objective of livelihood and profit, but such term shall not include a person who makes occasional repairs of firearms, or who occasionally fits special barrels, stocks, or trigger mechanisms to firearms;

    Seems as though this wouldn't apply. I may be wrong though, and will definitely keep my nose clean withe the ATF! Thanks!
    EVIL PREVAILS WHEN GOOD MEN FAIL TO ACT.

  10. #10
    VIP Member
    Array nn's Avatar
    Join Date
    Aug 2006
    Location
    NC
    Posts
    7,123
    very nice polishing job

  11. #11
    Senior Member Array luvmyglock's Avatar
    Join Date
    Jan 2007
    Location
    Washington
    Posts
    641
    Quote Originally Posted by TuesdayClub View Post
    Try it by hand...Much harder/challenging, but very rewarding--Here's a CZ50 I did by hand:



    Darn good job on that CZ! I have a 2 year old daughter and wife=no time to do it by hand. Hell, I was lucky to get 2 hours to do it with the dremel!
    EVIL PREVAILS WHEN GOOD MEN FAIL TO ACT.

  12. #12
    Member Array mp45fan's Avatar
    Join Date
    Apr 2008
    Location
    Lubbock, Tx
    Posts
    380
    Quote Originally Posted by Logan5 View Post
    That is one immaculate looking G33!
    +1 Very nice job!
    Randy
    "The only purpose for a pistol is to fight your way back to the rifle you should have never laid down". -unknown

  13. #13
    Ex Member Array Ram Rod's Avatar
    Join Date
    Dec 2007
    Location
    Fayetteville, AR
    Posts
    13,687
    Pretty sweet! So.....you went and got dremel happy? I'm going to attempt to suppress my own ideas now. Think I'd rather start with someone else's pistol first.

    Say...is that going to make it more prone to rust?
    Last edited by Ram Rod; July 27th, 2008 at 03:48 AM.

  14. #14
    Senior Member Array ASSA9's Avatar
    Join Date
    Jul 2008
    Location
    Charlotte,NC.
    Posts
    838
    Cool
    Looks like you did a great job
    Zoe: "Preacher, don't the Bible have some pretty specific things to say about killing?

    Book: "Quite specific. It is, however, somewhat fuzzier on the subject of kneecaps."

  15. #15
    VIP Member Array Tubby45's Avatar
    Join Date
    May 2005
    Location
    Making ammo.
    Posts
    3,054
    That would be considered gunsmithing and you'd need an 01 FFL. The ATF's position is that if you attempt to get any form of compensation whatsoever you are attempting to make profit for a business. They don't play around with this stuff.
    07/02 FFL/SOT since 2006

Page 1 of 3 123 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Los, if you're bored....
    By crabbys44 in forum Defensive Carry Guns
    Replies: 12
    Last Post: March 6th, 2011, 07:58 PM
  2. Bored with my CCW
    By BugDude in forum Defensive Carry Guns
    Replies: 29
    Last Post: August 31st, 2010, 12:03 AM
  3. OK , Who got bored?
    By Pure Kustom in forum Off Topic & Humor Discussion
    Replies: 2
    Last Post: October 27th, 2009, 07:14 PM
  4. Are we really that bored?
    By farronwolf in forum The Second Amendment & Gun Legislation Discussion
    Replies: 52
    Last Post: March 22nd, 2009, 08:43 PM
  5. I'm getting bored.
    By Sticks in forum Carry & Defensive Scenarios
    Replies: 14
    Last Post: November 25th, 2008, 09:23 PM

Search tags for this page

borded and have a dremel

,

how to dremel a glock

,

how to polish a stainless steel revolver with dremel

,

how to polish stainless steel gun with a dremel

,

i'm bored what can i make with my dremel

,

luvmyglock polish barrel

,

nfa dremel firearms

,

polishing stainless steel gun with dremmel

,

polishing stainless steel revolver with dremel

Click on a term to search for related topics.