Dear Friends I read some threads on the Sig Double Action Kellerman and saw misconceptions on what the DAK trigger system was developed for. I recently attended a CCP course up at the Sig Academy and it was explained to me as our department is thinking about switching from a Sig P229 DA/SA to a DAK system. This is part of a memo I sent to my people as some of them had this same misconception of what the intermediate short reset option of the system was for. Here is what I learned about Sig's DAK from the course instructor:
- The DAK (Double Action Kellerman) system has an intermediate reset which provides the ability of the user of being able to fire the pistol in the event the user short strokes the trigger during a critical incident. The trigger pull for the system is 6.5 lbs. in full DAO (Double Action Only) and increases to 8 lbs. if the trigger is pulled from the intermediate short reset position.
- Sig recommends and trains so that the system is to be used as DAO (Double Action Only). You will see that they only list the 6.5 lbs. trigger pull in DA on their DAK models specifications sheets. They recommend that users should be trained to fire the pistol by utilizing the full double action trigger stroke so that the trigger is a consistent 6.5 lbs.
- They have heard of some departments who do not understand what the system is suppose to be for and have been training their officers to use the short stroke after the initial full trigger pull. This is incorrect.
Hope this clears up some misconceptions about the trigger system.