Kimber Ultra CDP II - question for Kimber experts - Page 2

Kimber Ultra CDP II - question for Kimber experts

This is a discussion on Kimber Ultra CDP II - question for Kimber experts within the Defensive Carry Guns forums, part of the Defensive Carry Discussions category; Originally Posted by MadMac Great advice. The last two trips to the range were 100%. I have been keeping better track of the lubrication. I ...

Page 2 of 2 FirstFirst 12
Results 16 to 21 of 21
  1. #16
    New Member Array joshs21's Avatar
    Join Date
    May 2007
    Location
    StL
    Posts
    3
    Quote Originally Posted by MadMac View Post
    Great advice. The last two trips to the range were 100%. I have been keeping better track of the lubrication. I have one Wilson mag (the ten rounder as they have yet to make one for the 9mm commander-sized frame), and I can disassemble and clean it like my Sig mags. The factory mags require me to run a patch around the top woth a toothbrush.

    I appreciate the advice, guys.
    I emailed Wilson a few weeks ago asking about a magazine that would fit flush in my 9mm Ultra CDP. They have them but said they are too new to be on the web yet.

    They said the part # i wanted was 500,9c. I ordered one and it fits perfectly. Unfortunately I haven't got a chance to try it out yet.


  2. #17
    Ex Member Array OILMAN69's Avatar
    Join Date
    Jun 2009
    Location
    HOUSTON TEXAS
    Posts
    102
    would love to see pics of this gun...

  3. #18
    Member Array Cloudpeak's Avatar
    Join Date
    Aug 2007
    Location
    Wyoming
    Posts
    241
    Quote Originally Posted by MadMac View Post
    The factory mags require me to run a patch around the top woth a toothbrush.
    I'm sure you know this and perhaps I've misunderstood but you know you can remove the follower and spring and do a thorough cleaning of the mag tube, right?
    Cloudpeak

  4. #19
    Member Array PatP's Avatar
    Join Date
    Apr 2007
    Location
    Spotsylvania, VA
    Posts
    141
    +1 on keeping the mags clean. you'd be suprised what you can swab out of them. I give the mags a good cleaning everytime I shoot, and a very light silicone oil lubing to keep everything moving.

  5. #20
    Ron
    Ron is offline
    Distinguished Member Array Ron's Avatar
    Join Date
    Aug 2006
    Location
    West Linn, Oregon
    Posts
    1,628
    Quote Originally Posted by Cloudpeak View Post
    I'm sure you know this and perhaps I've misunderstood but you know you can remove the follower and spring and do a thorough cleaning of the mag tube, right?
    I have a Kimber Ultra Carry II in 9mm with Kimber mags, and have not been able to get the follower out to do a thorough cleaning of the mags.

    Could you give some instructions? I have tried to depress the spring and put a nail through the holes to hold the spring in place, but the follower does not come out.

    What am I doing wrong?
    "It does not do to leave a dragon out of your calculations, if you live near him."

    J. R. R. Tolkien

  6. #21
    Member Array Cloudpeak's Avatar
    Join Date
    Aug 2007
    Location
    Wyoming
    Posts
    241
    I push the follower down with a piece of wood about 3/4 of the way down and pin the spring using one of the front holes. When the pressure is released, this will allow the spring to relax in such a way that spring pressure is taken off the bottom part of the follower (the part that slides against the rear surface of the mag) so that it can be shaken free. Once the follower is rattling around in the top of the mag, you can grab a hold of it and manipulate it until it comes out.

    If there is spring pressure on the leg of the follower, the follower will not come free when the mag is inverted and shaken. Anyway, this works on all of my mags that have split followers (which is all of them). Can't help with other styles of followers.

    Hope this helps.
    Cloudpeak

Page 2 of 2 FirstFirst 12

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Kimber Ultra CDP II vs. Kimber Eclipse Ultra II
    By lithium2k in forum Defensive Carry Guns
    Replies: 6
    Last Post: April 5th, 2009, 09:43 PM
  2. Question for Kimber Ultra Carry owners
    By Ron in forum Firearm Cleaning & Maintenance
    Replies: 2
    Last Post: March 16th, 2009, 08:50 AM
  3. Kimber Ultra Carry II 9mm Question
    By semostickbow in forum Defensive Carry Guns
    Replies: 3
    Last Post: December 11th, 2008, 04:08 PM
  4. Question on Kimber Ultra CDP II Carrying
    By harley91 in forum Defensive Carry Guns
    Replies: 10
    Last Post: May 26th, 2007, 02:55 PM
  5. Quick Holster Question for my Kimber Ultra.
    By Hivoltage in forum Defensive Carry Holsters & Carry Options
    Replies: 9
    Last Post: March 9th, 2007, 07:24 AM

Search tags for this page

disassemble kimber cdp
,
how many 9mm rounds in kimber cdp2
,
how to disassemble a kimber cdp
,

kimber ultra cdp ii

,

kimber ultra cdp ii 9mm

,
kimber ultra cdp ii 9mm ammo
,
kimber ultra cdp ii 9mm magazine
,
kimber ultra cdp ii disassembly
,

kimber ultra cdp ii recoil

,
kimber ultra cdp recoil spring
,
kimber ultra cdp11 recoil spring assembly
,
ultra cdp ii 9mm
Click on a term to search for related topics.

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» DefensiveCarry Sponsors