Milt sparks Vm2 vs UBG Canute

Milt sparks Vm2 vs UBG Canute

This is a discussion on Milt sparks Vm2 vs UBG Canute within the Defensive Carry Holsters & Carry Options forums, part of the Defensive Carry Discussions category; I will be adding shark trim to the Canute because it going to cost the same as the VM2 .Witch one you think is the ...

Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1
    Member Array glockfan23's Avatar
    Join Date
    May 2010
    Location
    orlando, fl
    Posts
    323

    Milt sparks Vm2 vs UBG Canute

    I will be adding shark trim to the Canute because it going to cost the same as the VM2 .Witch one you think is the best buy? Help me decide where to spend my money


  2. #2
    Senior Member Array ironmike86's Avatar
    Join Date
    Aug 2011
    Location
    Seattle
    Posts
    586
    Depends if you want to wait or not??? I think the Milt is 6mo out??

  3. #3
    VIP Member Array multistage's Avatar
    Join Date
    Mar 2011
    Location
    NW Iowa
    Posts
    2,408
    Yeah, they are six months out. Ordered a VMII for my Kimber. Horsehide, shark, all the goodies. Ordered it in October. Should have it in March or so.

    Only experience I have had with UBG Holsters is reading the comments of the very happy customers when they get a new one.

    Either should be good to go.

  4. #4
    Member Array glockfan23's Avatar
    Join Date
    May 2010
    Location
    orlando, fl
    Posts
    323
    Also I forgot to add the milt spark gonna be used and comes with mag holder(milt spark)

  5. #5
    sgb
    sgb is offline
    VIP Member Array sgb's Avatar
    Join Date
    Jan 2006
    Location
    You don't need to know
    Posts
    2,414
    VMII
    "There is a secret pride in every human heart that revolts at tyranny. You may order and drive an individual, but you cannot make him respect you." William Hazlitt (1778 - 1830)

    Best Choices for Self Defense Ammunition

  6. #6
    Member Array ghawk249's Avatar
    Join Date
    Nov 2006
    Location
    tennessee
    Posts
    76
    I had the VMII and it was a very well made holster, but I could never find the sweet spot for carry. I have bought the UBG regulator OWB holster and can not say enough about the workmanship and feel of this holster.

  7. #7
    Member Array Jubz's Avatar
    Join Date
    Mar 2011
    Location
    SoCAL
    Posts
    48
    +1 on UBG Holsters. Nate is an excellent craftsman with a turnaround time of 4 weeks. I've got 3 shark-trimmed Regulators (OWB) from him and his fit/finish has been consistently excellent.

    3Regulators.jpg

  8. #8
    Member Array CP14.45's Avatar
    Join Date
    May 2005
    Location
    Phoenix, Arizona
    Posts
    26
    VMII horse and shark has carried my P14.45 for many years now.
    Very comfortable to carry a full sized 1911 at 2:00 position.

    Clarence2012_0115cp0001.JPG
    Clarence
    Bullseye 2568-83x
    Distinguished Revolver #99
    E.I.C. 30pts.(need a hard leg)
    10z n Xs

  9. #9
    Member Array Jubz's Avatar
    Join Date
    Mar 2011
    Location
    SoCAL
    Posts
    48
    Quote Originally Posted by CP14.45 View Post
    VMII horse and shark has carried my P14.45 for many years now.
    Very comfortable to carry a full sized 1911 at 2:00 position.

    Clarence2012_0115cp0001.JPG
    Great looking holster!
    I had just acquired a similar one in shark trim, though made by TT Gunleather.
    I was really fortunate in getting this used shark trimmed TTGL for my G23, from a member here while I have a plain leather one on order.



    My other TTGL's for a G27 and M&P40:

    Last edited by Jubz; January 15th, 2012 at 09:37 PM.



  10. #10
    New Member Array ccbricker's Avatar
    Join Date
    Dec 2009
    Location
    Kentucky
    Posts
    1
    Here is a side by side. HK45c in the UBG. USP45C in the VMII. I like the both a lot. Slight nod to the VMII.




    Sent from my iPad using Tapatalk

  11. #11
    Member Array SATCHMO1960's Avatar
    Join Date
    Dec 2011
    Location
    Urbana Ohio
    Posts
    92
    I also looked at the VM II and loved the design and heard so much about them. The wait is insane and in looking found the Comm3 from H.B.E. Specialty LeatherWorks.. Eric is an awesome guy and I loved what he said on his site about quality and why he makes his holster's the way he does. He even recieved permission to use the VM II design with his own changes. A little bit of a wait but getting a cordovan with shark trim for my Glock23
    "Be not ye afraid of them: remember the LORD, which is great and terrible, and fight for your brethren, your sons, and your daughters, your wives, and your houses." Nehemiah 4:14

  12. #12
    Member Array glockfan23's Avatar
    Join Date
    May 2010
    Location
    orlando, fl
    Posts
    323
    Thank you guys for the replies , I decide to go with the Canute with reinforcement mouth with shark trims

  13. #13
    VIP Member Array SIGguy229's Avatar
    Join Date
    Mar 2006
    Location
    Kommie-fornia-stan
    Posts
    7,078
    You won't go wrong with either. This is one of the few times in your life when you are in a win-win situation.
    Magazine <> clip - know the difference

    martyr is a fancy name for crappy fighter
    You have never lived until you have almost died. For those that have fought for it, life has a special flavor the protected will never know

  14. #14
    Distinguished Member Array bigmacque's Avatar
    Join Date
    Jun 2010
    Location
    Florida
    Posts
    1,786
    I can only speak for UBG, but my UBG is one of only three holsters that I use all the time. I have an Uncle Mike's, a DeSantis, and one or two others that don't get used any more at all; my UBG, my Remora, and my RGrizzle are the three that I always use.
    I'm in favor of gun control -- I think every citizen should have control of a gun.
    1 Thess. 5:16-18

  15. #15
    Member Array glockfan23's Avatar
    Join Date
    May 2010
    Location
    orlando, fl
    Posts
    323
    How the canute rides on the hip?? rides high or low??

Page 1 of 2 12 LastLast

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

milt sparks hk45c threaded
,

milt sparks vm2

,
milt sparks vm2 1911
,
milt sparks vm2 3 1911
,
milt sparks vm2 for glock 23
,
milt sparks vm2 glock
,

milt sparks vm2 hk45c

,

ubg canute

,

ubg canute holster

,

ubg canute vs milt sparks vm2

,
ubg canute with glock 23
,

ubg vs milt sparks

Click on a term to search for related topics.

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» DefensiveCarry Sponsors