recommendations of crossdraw holster for xd 40sc

recommendations of crossdraw holster for xd 40sc

This is a discussion on recommendations of crossdraw holster for xd 40sc within the Defensive Carry Holsters & Carry Options forums, part of the Defensive Carry Discussions category; I haven't received my CCW yet. However I plan on carrying both my G23 strongside and my Xd40 (as BUG) in a crossdraw holster. I ...

Results 1 to 11 of 11

Thread: recommendations of crossdraw holster for xd 40sc

  1. #1
    New Member Array Whazzup's Avatar
    Join Date
    Jan 2008
    Location
    South
    Posts
    14

    recommendations of crossdraw holster for xd 40sc

    I haven't received my CCW yet. However I plan on carrying both my G23 strongside and my Xd40 (as BUG) in a crossdraw holster. I have been using a SERPA for the 23 and XD (which prints like crazy). I was wondering if anyone had a recomendation on a crossdraw holster for this weapon.

    Thanks


  2. #2
    VIP Member Array matiki's Avatar
    Join Date
    Dec 2007
    Location
    N.W.
    Posts
    2,917
    Quote Originally Posted by Whazzup View Post
    I haven't received my CCW yet. However I plan on carrying both my G23 strongside and my Xd40 (as BUG) in a crossdraw holster. I have been using a SERPA for the 23 and XD (which prints like crazy). I was wondering if anyone had a recomendation on a crossdraw holster for this weapon.

    Thanks
    +1 on the SERPA print issue. Ugh... its too bad, it's an awesome holster in all other respects IMNSHO.

    That's quite a back up gun...

    I like these folks:

    High Noon Holsters
    Milt Sparks Holsters
    El Paso Saddlery

    I have an outstanding order with:

    CrossBreed Holsters, Innovative holsters for concealed carry-1911-Glock-HK-Sig-Taurus-Kimber-Springfield-Colt-XD

    I've heard nothing but good things about crossbreed so I'm looking forward to receiving my order.

    Highnoon doesn't have much that would work as a good cross-draw, and I think you'd need to talk to crossbreed about your needs.
    "Wise people learn when they can; fools learn when they must." - The Duke of Wellington

  3. #3
    New Member Array Whazzup's Avatar
    Join Date
    Jan 2008
    Location
    South
    Posts
    14
    thanks i will check those out

  4. #4
    New Member Array fattmallard's Avatar
    Join Date
    Jan 2008
    Location
    Missouri
    Posts
    6
    You might check out Milt Sparks, or Mernickle...

  5. #5
    Senior Member Array Super Trucker's Avatar
    Join Date
    Dec 2004
    Location
    S.E. Michigan
    Posts
    534
    Contact DeSantis and request they make the sky cop for the XD. I am hoping they will if enough people want it. I have 2 of these for other guns and love them. But so far they do not make one for the XD.

    Here is a link to show what it looks like.
    Sky Cop™

  6. #6
    New Member Array Whazzup's Avatar
    Join Date
    Jan 2008
    Location
    South
    Posts
    14
    Quote Originally Posted by Super Trucker View Post
    Contact DeSantis and request they make the sky cop for the XD. I am hoping they will if enough people want it. I have 2 of these for other guns and love them. But so far they do not make one for the XD.

    Here is a link to show what it looks like.
    Sky Cop™
    will do

  7. #7
    Distinguished Member Array CT-Mike's Avatar
    Join Date
    Oct 2007
    Location
    CT
    Posts
    1,510
    I would say to contact Kevin at K&D, but he has decided to stop making holsters for Springfield products unfortunately. Thankfully I got my Dakota Defender order in for my XD before he made this decision.
    "The natural progress of things is for liberty to yield, and government to gain ground."

    - Thomas Jefferson

    "I'm the arrow, you're my bow, shoot me forth and I will go"

    "Do not let any individual posts put a knot in your Big Boy Under-Roos"

  8. #8
    Member Array Final Option's Avatar
    Join Date
    Nov 2007
    Location
    Boondocks North Texas
    Posts
    43
    According to posts on another forum Kevin at KD is indeed making holsters for the Springfield XD. He just no longer participates in the forum.

  9. #9
    Distinguished Member Array CT-Mike's Avatar
    Join Date
    Oct 2007
    Location
    CT
    Posts
    1,510
    Last thing I read on xdtalk was that he was no longer accepting orders as I posted above. I went over there today and noticed that he changed his mind as you posted above.

    So, to the OP, talk to Kevin at K&D holsters. I have a Dakota Defender on the way for a XD40SC, at the 14 week point now, hopefully I will have it in the next few weeks. Then I just need to go ahead and buy the gun.

    Mike
    "The natural progress of things is for liberty to yield, and government to gain ground."

    - Thomas Jefferson

    "I'm the arrow, you're my bow, shoot me forth and I will go"

    "Do not let any individual posts put a knot in your Big Boy Under-Roos"

  10. #10
    Member Array BluesStringer's Avatar
    Join Date
    Sep 2007
    Location
    Out Here, USA
    Posts
    100
    Wazzup, are we to assume that you're only considering OWB rigs? If so, I believe you are unnecessarily limiting your options to overcome your printing problem. There are a ton of comfortable, highly concealable and easily accessible IWB holsters out there these days, some leather, some Kydex and some that are made of both. If your main concern is to eliminate (as much as is humanly possible) printing, you really should look into some of those options.

    If you're not limited to OWB, then the aforementioned Crossbreed is a great solution, as are Comp-Tacs, K&D, Raven Concealment and almost any custom makers, as long as you're able to wait quite a long time in most cases.

    Blues
    "A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government." -- George Washington

  11. #11
    Member Array pbanbury's Avatar
    Join Date
    Nov 2007
    Location
    Washington
    Posts
    27
    Wazzup, just to add to Blues' comment- the Raven is made to do both IWB and OWB. With the pancake attachments it rides as high and tight as a Marine haircut.

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. ANKLE Holster with XD9/40SC??? J-Frames?
    By USMCXD in forum Defensive Carry Holsters & Carry Options
    Replies: 10
    Last Post: April 25th, 2010, 12:14 AM
  2. Mernickle CrossDraw Holster
    By ECHOONE in forum Defensive Carry Guns
    Replies: 7
    Last Post: March 1st, 2010, 05:01 PM
  3. Driving to crossdraw holster.
    By boscobeans in forum Defensive Carry Holsters & Carry Options
    Replies: 6
    Last Post: September 23rd, 2009, 02:42 PM
  4. Looking for a crossdraw holster
    By JLaw in forum Defensive Carry Holsters & Carry Options
    Replies: 12
    Last Post: April 12th, 2008, 09:54 PM
  5. crossdraw holster
    By elrey718 in forum Defensive Carry Holsters & Carry Options
    Replies: 8
    Last Post: February 25th, 2008, 10:59 PM

Search tags for this page

cross draw holster for springfield xd

,

cross draw holster for xd

,

cross draw holster recommendations

,

cross draw holster springfield xd

,

cross draw holster xd 40

,
cross draw holsters for xd 40
,
crossdraw holster for springfield xd
,

crossdraw holster xd

,

springfield xd cross draw holster

,
xd cross draw
,

xd cross draw holster

,

xd crossdraw holster

Click on a term to search for related topics.