The Laredo Defender from K&D Holsters

This is a discussion on The Laredo Defender from K&D Holsters within the Defensive Carry Holsters & Carry Options forums, part of the Defensive Carry Discussions category; http://www.shooterslegacy.net/articl...odefender.html Laredo Defender from K&D Holsters By J. Lee Weems Several months ago, I aquired a "Laredo Defender” holster from K&D Holsters, which can be ...

Results 1 to 14 of 14

Thread: The Laredo Defender from K&D Holsters

  1. #1
    Senior Member Array CombatEffective's Avatar
    Join Date
    Apr 2005
    Posts
    998

    The Laredo Defender from K&D Holsters

    http://www.shooterslegacy.net/articl...odefender.html


    Laredo Defender from K&D Holsters
    By J. Lee Weems


    Several months ago, I aquired a "Laredo Defender” holster from K&D Holsters, which can be found online at http://www.kdholsters.com. I have been wearing the holster on an almost daily basis since it arrived, and I would like to share my opinion of this holster.

    The Transaction

    The customer service I received from K&D was outstanding. I mentioned on an online forum that I was looking for a new holster for my issued S&W 4006. I had recently switched from uniform to plain-clothes duty, and I needed a holster for my new assignment. A satisfied customer of K&D sent an email to Kevin Manley, the proprietor of K&D Holsters, alerting him to a potential customer, and Kevin contacted me and offered to work with me to create a holster to my specifications. Kevin and I swapped countless emails and had a few phone conversations discussing possible design options for my holster. What I wanted was a holster that was easy to put on and take off, preferably without having to slide it on and off a belt each time, but that also fastened to the belt and had a thumbsnap. As this holster was going to b

    e worn on duty, I was concerned about the possibility of a “gun grab” and I wanted more retention options than a standard paddle holster would offer while being as easy to put on and take off as is a paddle holster. We settled on a design, and Kevin set about making the holster. A couple of weeks later, Kevin emailed me to say that he had created a prototype holster based on our discussions. However, he had a concern about the design, and he wanted to discuss it with me. He very well could have simply produced the holster as I specified, but he made to the extra effort to satisfy the needs of his customer. We discussed a few changes to the design, and the result was the Laredo Defender. The holster that I am reviewing is the prototype. The total turn around time from order to receiving the holster was less than a month including the design change. I also ordered a matching magazine pouch, which I will also comment on in this review.

    The Holster

    The holster is what I would classify as a pancake style holster. However, instead of belt slots, this holster attaches to the belt via two straps that wrap around the belt and fasten with snaps. This allows the user to put on and take off the holster without having to slide it on and off of the belt. The back of the holster is pre-curved, which allows it to fit close to the body. As discussed above, I ordered this holster with a thumbsnap, as I will be wearing it on duty. My issued duty weapon is a S&W 4006. This holster also works for the S&W 4013 that I recently acquired.


    Here is the Laredo Defender before it was dyed black.


    Here is a rear view of the Laredo Defender showing how it wraps around the belt.

    Performance

    I have been very pleased with the holster. It is very comfortable, and it stays in place well. I constantly had to reposition the Gould & Goodrich pancake holster that I was issued, and this is not the case with the Laredo Defender. It holds very tightly to the body and disappears under a sport coat. I have even worn it to a training session with other officers with only a baggy T-shirt covering it, and the other officers did not notice my weapon. In fact, later in the training session I showed the holster to one of the other officers, and he was shocked, as he had no idea I was wearing a weapon.


    The Laredo Defender fits tightly to the body.

    The draw from the Laredo Defender is extremely fast. I am amazed at how fast I can get my pistol on target from this holster. This holster is also not what I refer to as "belt dependent". I have worn it with several different belts, even a nylon under-belt with no buckle, and it balances very nicely and stays tight to the body regardless of make or width of belt.

    The one change that has been made from the prototype is thumbsnap design. The strap on the prototype is tapered as it goes behind the hammer instead of staying the same width all the way to the snap. The snap itself is small, and I have bumped it open a few times. It is easy to snap back together, but the snapping movement takes a little more care than it does when using a larger snap. I discussed this issue with Kevin, and future holsters will use a wider strap and a larger snap thus eliminating this issue.


    A top view of the Laredo Defender showing how it curves to fit to the body.

    I also ordered a magazine carrier from K&D, and I have been very pleased with the magazine carrier as well. It rides comfortably on the belt, and the magazine stays secure in the carrier until I remove it.


    The clip-on style magazine carrier is a great value at $18.00.

    Conclusion

    As you can tell, I have been very pleased with the Laredo Defender. It has rapidly become my favorite holster. It fits tight to the body while still allowing for a very fast draw stroke (even faster than my kydex paddle holsters). It is easy to put on and take off while providing much more retention than a paddle holster. The Laredo Defender always draws the attention of other officers and my shooting friends, as it is a very nice looking holster. The Laredo Defender is also a very nice value at $62.50. The magazine carrier is a nice match to and is a good value as well at a price of $18.00. Plus, you get to deal with a company that will provide you with great customer service and will work with you to satisfy your holster needs. You can contact Kevin via email at leathercraft@hotmail.com to discuss your holster needs with him
    Shooters' Legacy

    Special sections for S&W and Ruger

  2. Remove Ads

  3. #2
    VIP Member Array ExSoldier's Avatar
    Join Date
    Dec 2004
    Location
    Coral Gables, FL
    Posts
    5,724
    Looks like a well made holster if you happen to like the little snap on loops, which I myself don't care for. But I really dislike the sprung steel clip for securing the mag holder. Much prefer the Blade Tech or Galco "J" hook for this.
    Former Army Infantry Captain; 25 yrs as an NRA Certified Instructor; Avid practitioner of the martial art: KLIK-PAO.

  4. #3
    Senior Member Array CombatEffective's Avatar
    Join Date
    Apr 2005
    Posts
    998
    I appreciate your candor. As I stated in the review, I needed a holster that could be removed quickly without needing to unfasten my belt, and I didn't want a paddle holster due to gungrab concerns on the job. I needed a holster that would fasten to the belt.

    As for the mag carrier, B-T makes a nice product, but it would exactly match my holster and belt now would it? :)
    Shooters' Legacy

    Special sections for S&W and Ruger

  5. #4
    VIP Member Array ExSoldier's Avatar
    Join Date
    Dec 2004
    Location
    Coral Gables, FL
    Posts
    5,724

    If not B-T then maybe....

    Quote Originally Posted by CombatEffective
    As for the mag carrier, B-T makes a nice product, but it would exactly match my holster and belt now would it? :)
    Ahhhh but the Galco "J" Hooks would....perfectly. I have several of those. I have had the rather embarrassing experience of having those sprung steel "clips" on my mag holders and even on an early IWB (YEARS AGO!) and when I had to draw either, I pulled the holder and even once the holster out with the instrument! Very humiliating to show the BG your holster still hung onto your piece. Smacks of an amateur...
    Former Army Infantry Captain; 25 yrs as an NRA Certified Instructor; Avid practitioner of the martial art: KLIK-PAO.

  6. #5
    Member Array K-Man's Avatar
    Join Date
    Mar 2005
    Location
    FL
    Posts
    310
    Thanks for the write up/review. As mentioned, we've changed some things on the current version being made. We've had the opportunity to make it for a variety of different size guns, so it can easily be adapted to suit your needs.

    With respect to the clips on the mag holder, that is the one that we put for a standard order. I do have other clips of various styles on hand, and could possibly acquire other styles if a customer wanted a particular type of clip. In addition, I've not received any reports of our clips failing at a critical time/point.

    I'll probably start making my own kydex clips in the not too distant future as I have the equipment and material to do that now.

  7. #6
    Senior Member Array CombatEffective's Avatar
    Join Date
    Apr 2005
    Posts
    998
    Quote Originally Posted by ExSoldier762
    Ahhhh but the Galco "J" Hooks would....perfectly. I have several of those. I have had the rather embarrassing experience of having those sprung steel "clips" on my mag holders and even on an early IWB (YEARS AGO!) and when I had to draw either, I pulled the holder and even once the holster out with the instrument! Very humiliating to show the BG your holster still hung onto your piece. Smacks of an amateur...


    That's a good point, but I have never had that happen with me. I do know of one maker that turns the spring clip upside down, which would keep that form happening.
    Shooters' Legacy

    Special sections for S&W and Ruger

  8. #7
    Assistant Administrator
    Array P95Carry's Avatar
    Join Date
    Mar 2005
    Location
    South West PA
    Posts
    25,482
    Great write-up Lee and well illustrated. Beautiful workmanship as usual from Kevin.

    For those that have seen my eagle Defender for my SIG probably know how much I like that and the very nice tight-to-body way it holds the gun. This is why I see little benefit for IWB - which I just do not like as a first choice. The risk of printing is miniscule and the gun rides at a good height while still allowing me a slick draw stroke.

    If I needed quick on and off that solution on yours Lee would be my choice - very nice indeed.
    Chris - P95
    NRA Certified Instructor & NRA Life Member.

    "To own a gun and assume that you are armed
    is like owning a piano and assuming that you are a musician!."


    http://www.rkba-2a.com/ - a portal for 2A links, articles and some videos.

  9. #8
    Senior Member Array CombatEffective's Avatar
    Join Date
    Apr 2005
    Posts
    998
    Ex,

    Could you please post a pic you the J hooks that you are mentioning?
    Shooters' Legacy

    Special sections for S&W and Ruger

  10. #9
    Senior Member Array CombatEffective's Avatar
    Join Date
    Apr 2005
    Posts
    998
    Chris,

    Thanks for the kind words.
    Shooters' Legacy

    Special sections for S&W and Ruger

  11. #10
    Distinguished Member Array fotomaker57's Avatar
    Join Date
    Jun 2005
    Location
    Missouri
    Posts
    1,544
    Thanks for sharing the article. After reading it I can't wait for my Eagle Defender to arrive.
    Mike
    The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government.
    Thomas Jefferson

  12. #11
    Senior Member Array CombatEffective's Avatar
    Join Date
    Apr 2005
    Posts
    998
    Glad you enjoyed it.
    Shooters' Legacy

    Special sections for S&W and Ruger

  13. #12
    Member
    Array BigJon's Avatar
    Join Date
    Nov 2005
    Location
    Montgomery, AL
    Posts
    313
    Super-informative write-up, CombatEffective. Thanks!

    Best,
    Jon
    "You may not know it, but there's things that gnaw at a man worse than dyin'."

    Charles Travis Postlewaite, 1882

  14. #13
    Senior Member Array dpesec's Avatar
    Join Date
    Oct 2005
    Location
    Ohio
    Posts
    538
    I haven't seen the Galco hooks, but I have the habit of breaking them. I bump into things and the bottom of the hook catches on it and snap they go.
    I guess I'm a klutz.
    Dave

    “The highest obligation and privilege of citizenship is that of bearing arms”. General George Patton—US Army

    Vis et Veneratio

    "So this is how democracy dies: to thunderous applause." Actress Natalie Portman as Padme in Star Wars Revenge of the Sith

  15. #14
    Senior Member Array CombatEffective's Avatar
    Join Date
    Apr 2005
    Posts
    998
    You're welcome Mr. Jon.
    Shooters' Legacy

    Special sections for S&W and Ruger

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Eagle or laredo defender?
    By 1911luver in forum Defensive Carry Holsters & Carry Options
    Replies: 8
    Last Post: May 3rd, 2008, 06:48 AM
  2. K&D Laredo Defender just arrived!
    By arawn in forum Defensive Carry Holsters & Carry Options
    Replies: 13
    Last Post: October 14th, 2007, 11:36 AM
  3. K&D Laredo Defender
    By madecov in forum Defensive Carry Holsters & Carry Options
    Replies: 10
    Last Post: May 6th, 2007, 09:15 PM
  4. K&D Laredo Defender HERE!!!!!
    By madmike in forum Defensive Carry Holsters & Carry Options
    Replies: 37
    Last Post: March 28th, 2006, 08:38 AM
  5. Got my Laredo Defender holster by KD
    By krang in forum Defensive Carry Holsters & Carry Options
    Replies: 9
    Last Post: March 21st, 2006, 10:25 PM

Search tags for this page

holster s&w 539#i
,
k & d holsters
,
k and d holsters
,
k d holsters
,

k&d holsters

,

k&d laredo defender

,
k&d laredo holster
,
kd holsters
,
laredo defender
,
laredo defender holster
,
laredo holsters
,
s&w 4013 holster
Click on a term to search for related topics.