Spyderco Manix 2 Lightweight - REVIEW

Spyderco Manix 2 Lightweight - REVIEW

This is a discussion on Spyderco Manix 2 Lightweight - REVIEW within the Defensive Knives & Other Weapons forums, part of the Defensive Carry Discussions category; Specifications: Overall Length: 8" Blade Length: 3.39" Cutting Edge: 2.87" (plain) Blade Thickness: 0.118" Blade Steel: CTS BD1 Handle Material: FRCP Closed Length: 4.67" Weight: ...

Results 1 to 8 of 8
Like Tree1Likes
  • 1 Post By BR101

Thread: Spyderco Manix 2 Lightweight - REVIEW

  1. #1
    Member Array BR101's Avatar
    Join Date
    Sep 2012
    Location
    PA
    Posts
    178

    Spyderco Manix 2 Lightweight - REVIEW



    Specifications:
    Overall Length: 8"
    Blade Length: 3.39"
    Cutting Edge: 2.87" (plain)
    Blade Thickness: 0.118"
    Blade Steel: CTS BD1
    Handle Material: FRCP
    Closed Length: 4.67"
    Weight: 2.85 oz.
    Made in Golden, Colorado, USA

    Are you a light weight neat freak? Looking for a American made, light weight, perfect sized EDC knife? This Spyderco Manix 2 is an awesome choice for the price. I have been carrying this knife alot over the last three or so weeks using it rigorously and I must say it's a pretty impressive knife despite my initial thoughts.

    At first glance you will see the handle is held together by press fit pins with the exception of the pivot screw. I was very skeptical whether or not I'd like that since I like to tweak and break down my knives for servicing. But after using this knife I came to realize that the press fit pin construction isn't so bad. And getting in there to clean and service the knife isn't so bad. A simple Q-tip and or canned air is really all you need to get the dirt, dust, and grim out of there.



    The leaf shape flat grind plain edge blade is constructed using Carpenter Steel (CTS-BD1). This steel is formulated right here in the United States and from my experiences thus far. It is fairly easy to service and retains a razor edge for some time. I tossed it on the Edge Pro Apex last night to put a good edge on it. Unlike S30V and S35V, this steel was very easily manipulated.

    I've been using this knife for breaking down the typical heavy duty shipping cardboard boxes I get, 1" thick rope and I've even used it to cut up fruit and other foods. It's just a great well balance knife that I feel would be great for 99.9% of all EDC cutting task.



    In the above picture I wanna point out three characteristics about the Manix 2. First off is the thumb ramp and finger choil. The jimping on both areas are very ample and efficient Even if you're wearing gloves you'll be able to choke up on the blade with a firm solid grip. Second is the half inch deploying hole. Flipping this blade out is a breeze with absolutely no resistance. Even with gloves on it's still a breeze! Last but not least, this thing is made in Golden Colorado, USA EARTH. So when you tell your friends and family about this awesome affordable knife you just bought, and they doubt it's possible to get a high quality knife made in American for that price, you can pull it out and show them.





    The handle on the Spyderco Manix 2 is constructed using fiberglass reinforced co-polymer (FRCP). I am typically a G10 scale fan boy but I've warmed up to the FRCP. The FRCP scales are attributed to the weight of this knife (2.85oz). I've used this knife in dry and wet conditions with and without gloves and I must say, with the textured scales and the thumb ramp and finger choil it's almost impossible to lose control of this knife.

    The Spyderco ball bearing lock mechanism works very smoothly. If you have used the Benchmade Axis-lock than you'll be able to open and close this knife one handed no differently than the Benchmade. And at the back of the handle is a oversized lanyard hole.





    The Spyderco wire clip is one of my favorite pocket knife clips. These are very "low-key" looking, very strong and most important it sits the knife just perfectly in my pocket. On this Manix 2 the pocket clip can be arranged for left or right carry but tip up carry only.



    Above are some pictures showing it's size in the hand open and closed. Also I put it next to my Spyderco Manix 2XL for comparison.

    My final conclusion on the Spyderco Manix 2: The Manix 2 is certainly a great value EDC knife. If you're someone who is very picky on gear weight, this is a knife you'll want to consider. It's durability and ease of servicing really makes it a great knife. Spyderco does offer this knife in a real nice translucent blue color which I plan on scooping up. I think my only gripe would be I would have liked to seen the deep carry wire clip used like the Spyderco Sage has. But it's not that big of a deal really. Definitely give it a try if you're in the market for a new EDC blade.

    Check out my WEBSITE for other cool gear reviews.
    xeero likes this.
    Blade Reviews 101 - Knife, Tactical & Survival Gear Reviews
    The Knife Exchange - Buy, Sell, and Trade Knives
    Facebook - Instagram


  2. #2
    Member Array MidWorld's Avatar
    Join Date
    Apr 2013
    Location
    Ankeny, IA
    Posts
    116
    Great review! This knife has been on my short list for a while now.

  3. #3
    Senior Member Array bklynboy's Avatar
    Join Date
    Jun 2006
    Location
    VA
    Posts
    598
    Great review! The same knife in blue is probably going to be my next Spydie

  4. #4
    VIP Member Array lionround's Avatar
    Join Date
    Jan 2013
    Location
    Memphis
    Posts
    2,044
    Great review. I am not a knife person, but you almost talked me into buying one.
    If Barbie is so popular, why do you have to buy her friends?
    -- Steven Wright
    1950 Colt .38 Police Positive Special
    2013 SCCY 9mm CPX-2 Stainless Steel
    US Army 1973-1977, 95B

  5. #5
    Distinguished Member Array BadgerJ's Avatar
    Join Date
    Apr 2011
    Location
    Mid-Atlantic
    Posts
    1,530
    Nice knife. I have the M-II XL, although I was trying to find an original Manix with no luck. The blade deploys one-handed with a kinetic opening. I can't say I'm thrilled over the tip up carry the reverse of my EDC favorite the Tenacious, Resilience line from Spyderco. The lock takes some getting used to to close. Like the flat grind - best for slicing cheese. :)

  6. #6
    Member Array BR101's Avatar
    Join Date
    Sep 2012
    Location
    PA
    Posts
    178
    I really like the Manix line. I plan on picking up a few other manix's:
    - Translucent blue
    - Carbon fiber w/ S90V steel
    - Foliage Green w/ CTS-XHP
    - M2 XL in all black
    Blade Reviews 101 - Knife, Tactical & Survival Gear Reviews
    The Knife Exchange - Buy, Sell, and Trade Knives
    Facebook - Instagram

  7. #7
    RKM
    RKM is offline
    Distinguished Member Array RKM's Avatar
    Join Date
    May 2010
    Location
    PA
    Posts
    1,871
    The Manix is great. It's the best answer to the Axis lock yet. I have the original Manix 2. As far as feel and substantialness goes, the Manix feel a bit better than say, a Griptilian, however, I like the Axis lock and the way it works over Spyderco's ball bearing lock.

    I could never get in to light weight knives. I've always preferred my knife to have some weight to it. Despite the Griptilian's (probably my favorite folder) being very light weight.

  8. #8
    Member Array patrol's Avatar
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    413
    awesome review guy I'm actually gonna order one in that translucent blue when I get the coin together. I already have a large older Manix that I just fixed the pocket clip on. I tend to bend those things so darn much I swear I end up having to bend them back or order new one's from Spyderco, I hope that "wire" clip holds up under my rough abilities.
    If you can read this thank a teacher. If it is written in English thank a Marine.

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

bd-1 blade steel
,
cts bd1
,

cts bd1 vs s30v

,
cts-bd1
,
manix 2 for self defense
,
manix 2 lightweight review
,
manix 2 self defense
,

spyderco cts bd1

,

spyderco manix 2

,
spyderco manix 2 for self defense
,
spyderco manix 2 lightweight
,

spyderco manix 2 lightweight review

Click on a term to search for related topics.