Zero Tolerance 0566 Hinderer Design - REVIEW

This is a discussion on Zero Tolerance 0566 Hinderer Design - REVIEW within the Defensive Knives & Other Weapons forums, part of the Defensive Carry Discussions category; Many times in the past I've had people ask which knife I would suggest to them for EDC in the $150 dollar range. While there ...

Results 1 to 5 of 5
Like Tree2Likes
  • 2 Post By BR101

Thread: Zero Tolerance 0566 Hinderer Design - REVIEW

  1. #1
    Member Array BR101's Avatar
    Join Date
    Sep 2012
    Location
    PA
    Posts
    176

    Zero Tolerance 0566 Hinderer Design - REVIEW



    Many times in the past I've had people ask which knife I would suggest to them for EDC in the $150 dollar range. While there are some great knives out there in that price range, my personal opinion for what I like to EDC was the Zero Tolerance 0560. Unfortunately two things came into account when it came to the 0560: Cost and Size. There was nothing in the $150 range that shared the same ergonomics and quality parts as the 0560 until now...

    The Zero Tolerance 0566 has the same great ergonomics and quality materials as the 0560 at a price you cannot beat. Now there are some slight differences between the two knives that I will get into further in the review, but let me tell you, as someone who's EDC my Zero Tolerance 0560 for months, the 0566 is the closest feeling knife to the 0560.

    Specifications:
    Overall Length - 7.70"
    Blade Length - 3.25"
    Blade Thickness - 0.12"
    Blade Material - Elmax
    Handle Length - 4.45"
    Handle Materials - G10 Front, SS Lockbar
    Clip - Quad-Mount (Left/right - Tip up/down)
    Weight - 5.3 oz.



    The business end of the Zero Tolerance 0566 measures 3.25" and constructed from Elmax steel. It has a drop point shape with a beautiful stonewash finish. Out of the box it came razor sharp and I've found with my other Elmax ZT knives that there very easily to maintenance. The multi-faceted grinds not only make for a menacing look, but also function great for slicing and all sorts of cutting task.

    The ZT 0566 deploys super fast and smooth with the Speedsafe assist. If you don't like assisted knives, don't worry, you can easily remove the torsion bar under the G10 scale and it essentially makes it a manual opening knife. The blade rides on two bronze phosphor washers which attributes to the smoothness of the blade deployment. The flipper location is located in a position where you can either light-switch or pre-load the flipper straight down for deployment.



    Moving back to the handle we'll take a look at the jimping. The transition from the blade onto the handle is perfect. Some knives have very uncomfortable jimping and you find yourself not enjoying the knife because it causes to much pain in the thumb from gripping it. But that's not the case with this knife.



    The presentation side of the Zero Tolerance 0566 uses a real nice G10 scale. It's not overly abrasive to the point of being discomforting, but it's not smooth to the point that it would be a traction issue in a wet condition. One thing that I really like is the chamfered corners around the handle that really make for a smooth transition around the edges and minimize hot-spots when hard using this knife.



    The handles are mated together with standoff pillars. I really love this style of knife because of it's ease of cleaning and in my opinion it just looks much nicer. For cleaning I just run some water in there and use some compressed air to blow it dry. 9/10 times the knife is back to superb condition and I don't have to disassemble the knife for cleaning.



    This knife uses a stonewash finished stainless steel lockbar which has it's pros and cons. Sure it's not titanium which is a lightweight counterpart to the stainless steel. But the stainless steel does provide more strength which is something I am willing to give a little weight up for. Plus going with titanium would add a substantial cost increase. Lock up on this knife is rock-solid, absolutely no wiggling in any direction.



    The pocket clip on this knife will accommodate all carry options. Whether you want right or left hand carry or tip up or tip down, the Zero Tolerance 0566 will accommodate that no problem! As you can see above it sits nice and deep in the pocket with very little exposing out the top.

    Here is some pictures showing the Zero Tolerance 0560 next to the 0566.





    My final conclusion on the Zero Tolerance 0566: I absolutely love this knife for many reasons, but the biggest of all. It's the closest feeling EDC knife to the 0560 without spending over $150 bucks. It comes with the same high quality blade steel too! You can keep it assisted or you can deassist it for whichever deployment method you like best. The fit and finish is second to none. I would highly recommend this knife to anyone who is looking for a new EDC knife.

    I got mine from EknivesStore for $144 with FREE 2-day shipping.

    For other reviews, please check out my Website and/or my Instagram page.
    PEF and Mdauben like this.
    Blade Reviews 101 - Knife, Tactical & Survival Gear Reviews
    The Knife Exchange - Buy, Sell, and Trade Knives
    Facebook - Instagram

  2. Remove Ads

  3. #2
    Distinguished Member Array shadowwalker's Avatar
    Join Date
    Jul 2011
    Location
    Ghost Ridge USA
    Posts
    1,594
    Nice review and I think ZTs are one of the best out there hope to get another one being both of mine disappeared along with my 60s Randal.

  4. #3
    Member Array shooter8571's Avatar
    Join Date
    Jan 2014
    Location
    Chicago
    Posts
    45
    ZT0560 is a great knife, it's one of my EDC
    Great review as well


    Jack

  5. #4
    VIP Member Array Badey's Avatar
    Join Date
    Feb 2012
    Location
    Pittsburgh
    Posts
    2,892
    Nice review!
    "My problem with life is not that it is rational nor that it is irrational, but that it is almost rational." - G.K. Chesterton

  6. #5
    VIP Member
    Array PEF's Avatar
    Join Date
    Aug 2011
    Location
    Georgia
    Posts
    3,530
    Nice write up. I've taken an interest in knives lately, and your review was quite informative. Thanks for taking the time to put this together.
    -PEF, a Framer with a Steelie...
    ~~~~~~~~~~~~~~~~~~~~~~
    1. All guns are always loaded.
    2. Never let the muzzle cover anything you are not willing to destroy.
    3. Keep your finger off the trigger until your sights are on the target.
    4. Be sure of your target and what is beyond it.

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

zero tolerance knives review

,

zt 0566 defensive

Click on a term to search for related topics.