Printable View
http://i19.photobucket.com/albums/b1...lertrigger.jpg
The pin serves as a roller bearing.
The design cannot be patented as the Finns were doing something very similar back in '39.
What do you think? I have one set up on my personal Mosin and it feels like the second stage of a two-stage K98's pull, but smoother.
Regards,
Josh
Post pics of an original? What's the difference?
I have an M44 but haven't taken the trigger out. The most I've done is dis-assemble the bolt for a thorough cleaning.
My thoughts are that I'm unsure of your point.Quote:
Mosin Trigger – Thoughts?
I wanted to know what people thought of it was all!Quote:
Originally Posted by atctimmy
Josh
Thoughts? Anything you can do to improve a Mosin trigger is worth it.
If you pull it, and and the weapon to which it is attached goes bang; it is indeed a trigger... If said trigger is in a Mosin, and pulling it makes the Mosin go bang: then it is indeed a Mosin trigger.
Those are my thoughts on the matter. Yours may differ... but then you wouldn't be talking about Mosin triggers, you'd be talking about something else.
OK I was being a smarty pants. Sorry.Quote:
Originally Posted by Joshua M. Smith
My point was that you didn't give us much to go on. How 'bout some before and after pics or some more details.
Can you image what the Eastern front sounded like with 10 of thousands of these babies going off together Especially at dawn or dusk you'd have sight and sound.My is a mini flame thrower.I having issues after I fire it I need to use a block of wood to free the bolt.The safety now works.It's been to gunsmith and I think it's time to buy one that works'Anyone have same problem?let me know and I certainly would be greatful.
Hello,
That's sticky bolt syndrome. You need to take a 12 gauge shotgun brush and spin it in the chamber. This will free the dried cosmoline. Brush out said cosmoline.
When you shoot it, you will bleed cosmoline out of the metal's pores. Swab out the chamber every five rounds with a CLEAN paper towel each time. It will gradually get better until you have no more problems.
Regards,
Josh
Josh, all fun poking aside, when dealing with cosmoline, on handguns Like P64s and CZs; I have used a soak in mineral spirits to remove cosmoline (all plastic (grips and mag shoes) is removed prior, of course).Quote:
Originally Posted by Joshua M. Smith
Might such a soak work with a Mosin? Finding a container for such a soak might be a bit harder... but you could use a galvanized window box liner for a tub. They're available in lengths up to 60"... for about $50.00, shorter for less if you wanted to just do the barrel and receiver...