So I did a thing. New Mossberg by Gosh. - Page 3

So I did a thing. New Mossberg by Gosh.

This is a discussion on So I did a thing. New Mossberg by Gosh. within the Defensive Rifles & Shotgun Discussion forums, part of the Related Topics category; that would be mossbergs version of choke tubes. From mossbergs web site: #50774 Download High-Res Image » MSRP: $650.00 Compare prices and shop: Video: Buying ...

Page 3 of 3 FirstFirst 1 2 3
Results 31 to 36 of 36
Like Tree25Likes

Thread: So I did a thing. New Mossberg by Gosh.

  1. #31
    New Member Array solo paddler's Avatar
    Join Date
    Sep 2010
    Location
    Minnesota
    Posts
    3
    that would be mossbergs version of choke tubes. From mossbergs web site:

    #50774

    Download High-Res Image »
    MSRP: $650.00
    Compare prices and shop:

    Video: Buying a Gun Online »
    Share:
    SPECIFICATIONS
    Gauge 12
    Capacity 7
    Chamber 3
    Barrel Type Heavy-Walled
    Barrel Length 18.5"
    Sight Ghost Ring
    Choke Accu-Choke System - Cylinder Bore Choke Installed
    LOP Type Fixed
    LOP 13.875"
    Barrel Finish Parkerized
    Stock Finish Synthetic (Black)
    Weight 7
    Length 39.5"
    UPC 015813507745

    tony

  2. #32
    Member Array dsclaiborne's Avatar
    Join Date
    Nov 2016
    Location
    US
    Posts
    82
    I always thought cylinder bore or improved cylinder bore had no choke. Interesting

    Sent from my SCH-I545 using Tapatalk

  3. #33
    Member Array dsclaiborne's Avatar
    Join Date
    Nov 2016
    Location
    US
    Posts
    82
    I'm assuming that using an improved cylinder would give better accuracy?

    The IAC HAWK I have comes with an improved cylinder barrel with no chokes which is supposed to improve accuracy I'm assuming.

    Sent from my SCH-I545 using Tapatalk

  4. Remove Advertisements
    DefensiveCarry.com
    Advertisements
     

  5. #34
    Member Array dsclaiborne's Avatar
    Join Date
    Nov 2016
    Location
    US
    Posts
    82
    Ordered my gg&g follower for the 590a1 yesterday. I also ordered me a red delrin follower from S&J for my Mossberg 500.

    Sent from my SCH-I545 using Tapatalk

  6. #35
    Member Array dsclaiborne's Avatar
    Join Date
    Nov 2016
    Location
    US
    Posts
    82
    Haters are going to hate because they are envious! I don't care though!

    Well,

    It finally arrived yesterday at my ffl! I checked it out. The sights were straight, safety worked, slide action button worked, I fed it some snap caps and it ejected them with authority. I thought sks's were bad. This thing was packed in a thick grease almost like cosmoline. I just did a cursory wipe down there at the store. I was able to confirm prior to it arriving that it has the Mossberg accuchoke system. It comes with a cylinder bore choke installed and comes with the wrench. I ordered me an improved cylinder choke for it and it is enroute. After the cursory wipe down I boxed it back up in the double boxes that it came in and drove to the FedEx hub and shipped it off to Aimpro Tactical in Conifer Colorado, to have their action job and forcing cone lengthened, polished and back bored. I get a 10% leo discount so I thought why not? I've always wanted a custom 590a1 and I'm making it happen. When it gets back I am going to be sending the barrel off to magnaport to have it ported. I will get a 15% leo discount on that as well. All these mods will do the following.

    1. Tighten the patterns
    2. Reduce the recoil
    3. Keep the muzzle down for quicker follow up shots
    4. Make the action silky smooth
    5. Ensure reliable feeding.

    Thus far I have the following parts here or in route.
    1. Magpul 590 Moe forend-here
    2. GG&G 590 stainless follower -here
    3. GG&G front ambidextrous sling loop-here
    4. S&J Hardware flush fit for 18.5" barrels +2 4140 steel magazine extension-enroute from Canada this will give me 7 in the tube and 1 in the chamber for 8 rounds out of an 18.5" barrel
    5. Enhanced safety-enroute
    6. Improved cylinder choke-enroute
    7. Tacstar side saddle-enroute I'll only be using the metal backing plate.

    I have not decided yet if I am going to go with the magpul sga stock yet or not. I probably will though. If not and it works out to where this new enhanced safety can be manipulated smoothly on and off in a sweeping motion with my fingers much in the same way say an AK safety is with a pistol grip stock then I will take the Mesa tactical leo adapter, enidine hydraulic recoil buffer tube, magpul miad grip, and magpul ctr with Limbsaver butt pad off my 500 and run them on this 590 a1. This is the setup I'm hoping for.

    The only things I'll have left to do after the barrel porting are as follows.
    1. Cerakote over park the barrel, mag tube extension, and mag tube magpul flat dark earth
    2. Cerakote over alodine the receiver. Magpul flat dark earth
    3. Have the magpul forend cerakoted and baked magpul od green.
    4. Install all parts!

    I'll get a 20% leo discount on this.

    The last three things I'll purchase once it's back from paint are as follows

    1. Inforce wmlx 500 lumen light that I'll mount on the front of the magpul forend. I like this setup for the ergonomics.
    2. SOE Gear 2 point to 1 point convertible sling.
    3. Esstac 7 shot velcro shotgun cards.

    I'll keep you all updated with pics during the processes.

    FYI for those curious I've found cerakote over park to be durable as all get out. The park grabs a hold of the cerakote and doesn't want to let go which gives better adhesion and superior durability.

    Also, for aluminum I've found none better then to alodine first and then cerakote. This does exactly what park does on steel parts except this is on aluminum!

    This is the safety I'm going to be using so hopefully it'll work well with the mesa tactical setup.

    Last edited by dsclaiborne; March 25th, 2017 at 10:39 AM.

  7. #36
    Member Array dsclaiborne's Avatar
    Join Date
    Nov 2016
    Location
    US
    Posts
    82
    Accessories are arriving.

    1. Tacstar side saddle plate
    2. GG&G stainless 590 follower
    3. S&J +2 mag extension tube
    4. GG&G front sling loop mount
    5. Promag enhanced safety pm262
    6. S&J magazine spring, sling mount, and snap ring.
    7. Mossberg Accu choke improved cylinder choke



    Sent from my SCH-I545 using Tapatalk

Page 3 of 3 FirstFirst 1 2 3

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

marinecorps

Click on a term to search for related topics.