This was my first AR-15 build. I started with a Stag stripped lower, a left hand upper (made by a guy that the folks at Noveske suggested), Noveske 18" Recon barrel, Larue quadrail, Larue BUIS (front and rear), Magpul CTR stock, Magpul pistol grip and a DPMS parts kit.
Attachment 55959Attachment 55960Attachment 55961
PSA Build, PSA Pictogram lower, PSA LPK, PSA Complete Mid-Length Dissipator Upper, Nikon 1-4x M-233 w/Bobro Mount, MI LP rear BUIS, Magpul Grip, Magazine, Handguard, and trigger guard, A2 Stock, and Blackhawk Sling:
Colt AR6450 9mm w/ TA47-2 ACOG, Magpul grip and handguard, and Colt-Rogers Stock:
Colt LE6920 5.56mm w/ Aimpoint PRO and MBUS:
Future 5.56mm and 9mm Pistols (and then SBRs when the stamps get approved...both went pending this month...hopefully by summer):
We did a little shooting after I instructed a CCDW class here in KY. testing out my Contour Roam.
Very nice Trust8383!! You have excellent taste in weapons… ;)
Sneaky Bags, stippled LaRue Index Clips, Bad-ASS ambi 45 degree selectors and their new CASS-3P 45 degree combat selector and the new B5 Systems SOPMOD stock.
SCAR Heavy/17s (7.62x51), LMT 10.5" M4-CQBR type on Noveske lower, BCM 14.5" on Colt 6720 lower. Daniel Defense Flat Dark Earth RIS II M4A1 and Mk18 hand guards.
Sneaky Bags Small Rifle Case and Large Ammo Bag
The bottom one will be getting some Krylon this month… I think.
Cool pictures. I just never understood why people add vertical foregrips to a non select fire model? I guess its ergonomic for some or something. The fore grip is suppose to mitigate and reduce muzzle raise during a rapid fire engagement. I always opted out of carrying one on my battle rifle in the sand box. Im more of a grab as far forward almost to the FSB just short of where the barrel comes out from the shroud.
There are many more reasons I use one than auto fire. Actually, when I run a full auto rifle or am moving quick in semi I use the vert grip as more of a handstop. Most of the guys I shoot with, work with or just see out that are serious shooters run some form of a vert grip, everyone from current to ex SF to just serious shooters. The only ones I see any consistency of running without a vert grip are 3 gunners.
For me, it doesn't have as much to do with control of the weapon as it does consistent hand placement (outdoors at noon to indoors at midnight during a power outage my hand lands in the same place) and gives me a lot of control around barriers whether that's against a door frame, around or over a car, resting on a ledge, etc. Also, I run lights always and quite often I'm running PEQ-15's (a couple friend's have them and I borrow one when we're doing low light classes or even hunting hogs and coyotes) and the vert grip makes quite a difference for me.
Having said that, when my LaRue index clips came in, I decided to do without a vert grip or pressure switch for my light on my 10.5" for a little while, but I can already see why I prefer them.
I use mine as more of a handstop. Keep in mind that 14.5" rifle has a 12.25" rail.
Here's a good thread on m4carbine about the benefits of a vert grip. Of course they're not for everyone, but a lot of us see the utility in them with auto fire being low on the list, even for those carrying full auto capable rifles.
The Utility of VFG's - M4Carbine.net Forums
I like my vertical grips. I tried nothing, I tried the Magpul AFG and just didn't like it (though I love it on my pump shotgun). I grip the vertical grip with my left hand but keep my thumb on the left side of the handguard and kind of wrap it up and slighting over the top. Only my lower three fingers are on the grip with the top finger resting on the bottom rail. I think vertical grips are plenty useful. For me it's ergonomics. I destroyed my wrists when I was younger skateboarding. The pop and crack and they're just weak. I can't shoot a traditional style rifle for very long before it bothers my wrists. The least I can do is my shotgun with an AFG. I also have an AFG on my 10/22. It's a comfort thing for me.
I recently took the Romy vertical grip off my AK, but that had to do with mag changes being more difficult. I'm still playing with the idea of adding a stubby vertical grip, but I"m really liking the way it looks as it is with no vertical grip. I can always grip the magwell of the AK if I need to.
I'm half temped to get an M&P15 Sport lower just for the integrated trigger guard :P
My two new AR builds.
The lower one is 5.56 the upper one is 22LR. A few months ago I decided to build matching AR's
a few of the big factors why I did this is that 22 ammo is cheap, the range I belong to only allows static shooting
with rifle calibers, where as 22LR is fine in the pistol bays, there for I can move and shoot all I want. I am not as familiar
with the AR platform as I am with AK's so this will allow me to develop the muscle memory needed for the operating of the AR.
I also compete in USPSA with pistol, and wanted something to compete with in the rim-fire steel challenge matches, this will also give me
good trigger time behind the AR. I will be shooting the 5.56 allot but will have to travel a bit further to a public range.
The 5.56 I used a Sun Devil lower it has a PSA LPK I also went with PSA 16" upper
it as a Magpull trigger guard and a Magpull BUIS, Troy Ind. quad rail, Sure fire light
and Luccid red dot optics and a Badger Creek charging handle. I use MilSpec mags
The 22LR I used a Sun Devil lower, it has a RRA LPK. The upper is a dedicated Tactical Solutions 22LR
It also has a Troy Ind. quad rail and a Luccid red dot and Badger Creek charging handle extension.
I am using BlackDog mags.
They both have single point sling mounts, not shown are the slings.
had to give the EDC some camera time as well. G30