Guys I need some help.
I have just adopted a Winchester 1200 20G.
As with all adopted kids a good scubbing is in order.
For the life of me I can't get spring hooked to the extractor:aargh4:
Now it's dirty but you should sill be able to see the PIN .
Any tricks would be appreciated.
Alright guys, that problem makes no sense at all:rofl:
A little to much listening and not enough touching:hand5:
WELL, I have developed a new problem.
They thought the extractor spring was the problem( No extractor spring)
I have no Idea how they got the screw out of the firing pin plate.
What it is missing is a mainspring.
It seems the Winchester 1200 pump Brownwells no longer makes parts,until someone picks up the line.
There has to be a spring that's the same size.
Does anyone know which spring will work in this gun.
You can call
2326 Clinton Avenue West
Huntsville , AL 35805-3012
I know they carry alot of obsolete gun parts
WINCHESTER | 1200 | ITEM#236760B | e-GunParts.com