LinkBack URL
About LinkBacksThere's a member over at HPFF that removed the bow and that the stock is solid so no need to fill any holes. He posted that he can reach the mag release one handed now. Me I'm going to leave the bow on.
This is a discussion on Hi Point 995 and ATI Stock - An ongoing review within the Defensive Rifles & Shotgun Discussion forums, part of the Related Topics category; There's a member over at HPFF that removed the bow and that the stock is solid so no need to fill any holes. He posted ...
Array
There's a member over at HPFF that removed the bow and that the stock is solid so no need to fill any holes. He posted that he can reach the mag release one handed now. Me I'm going to leave the bow on.
Last edited by TheShadow; April 7th, 2009 at 12:08 AM. Reason: resize photo
“Put your pain in a box. Lock it down. No man is stronger than one who can harness his emotions.” -Act of Valor
Array
Shadow,
You may have talked me into getting a
Hi Point carbine
Array
I soooooo wish ATI would make one of these for the .40 version (4095)...
Array
I'd be curious to know how difficult it is for you to reach the magazine release? On the Berretta Storm I find it difficult to hit the release unless I bring my hand around to the left side and it seems it would be the same way on the Hi Point Stock?
What has your experience been and how do you see yourself doing a quick reload?
Thanks for posting this, I really find it interesting.
Array
I just ordered one of the new stocks. Can't wait for it to come in.
Does this stock come with a place to mount a red dot scope? I guess I'm wondering what kind of rail I need to put on top to just put your ordinary red dot scope on. Thanks in advance.
Array
The ATI Stock doesn't cover the Hi Point receiver.Originally Posted by actiger60
The rail attaches to the receiver with four allen screws.
You can use the Hi Point rail to mount the red dot but it's a cheep metal stamping that may give you problems keeping zero. Bushman makes a nice rail the uses the oem allen bolts in a short or full rail that reaches the length of the ATI stock. You can see the stamped Hi Point rail at the bottom of the photo.
BTW welcome to the forum.
“Put your pain in a box. Lock it down. No man is stronger than one who can harness his emotions.” -Act of Valor
Array
Bushman also makes a short rail for optic mounts like this one. Although it's hard to see in this pic. Along with the aluminum trigger and better charging handle made of aluminum and the muzzle break/flash hider on the end.
Array
The ATI stock certainly is a major ergonomic, handling and appearence upgrade for the HP 995. I Duracoated all the metal and added a barrel shroud, butt pad, acessories mounting rails.
When I leave the home port:
S&W 642 Airweight, Ruger SP 101, Colt Detective Spec., CZ RAMI, Kahr PM9, Kahr CW40, S&W Model 10-7, Glock 30, 19, and 26, Browning Hi Power, CZ82, Colt Commander, Dan Wesson PM7, Ruger LCP
Array
Looks good Pirate.
Is the shroud a Morese?
Array
I like this stock upgrade a lot.and would not
mind buying a HP carbine myself. Will wait and see if it
comes out in .45 flavor
Array
The ATI Stock doesn't cover the Hi Point receiver.
The rail attaches to the receiver with four allen screws.
You can use the Hi Point rail to mount the red dot but it's a cheep metal stamping that may give you problems keeping zero. Bushman makes a nice rail the uses the oem allen bolts in a short or full rail that reaches the length of the ATI stock. You can see the stamped Hi Point rail at the bottom of the photo.
BTW welcome to the forum.
would getting one of these do the job?:
EGW 16 in. Picatinny Scope Mount Extrusion Rail Gunsmith - $24.99 : EGW, Inc., World Class Precision Parts
Array
Should work just fine. You'll just have to drill your own holes for mounting is all. ;-)
Posting Permissions
Reply With Quote
