Is this information correct?
This is a discussion on Is this information correct? within the General Firearm Discussion forums, part of the Related Topics category; The dry fire issue came about because some guns either stick the firing pin ,or break it. AMT had this problem in some of their ...
February 27th, 2012 12:31 PM
The dry fire issue came about because some guns either stick the firing pin ,or break it. AMT had this problem in some of their guns(breaking firing pin ) it is more often poor quality steal or fit and finish. Some have been known to stick forward so when the slide closes there is a AD. This is where snap caps come in.
February 27th, 2012 01:02 PM
Only doors with recoil springs
Originally Posted by sgb
"Outside of the killings, Washington has one of the lowest crime rates in the country,"
--Mayor Marion Barry, Washington , DC .
February 27th, 2012 06:18 PM
This sounds familiar. This is the only time I will let the slide drop on an empty chamber with force. One time I left the take down lever down and the slide nearly fell off the front. :)
Originally Posted by fastk9dad
February 27th, 2012 06:24 PM
I wouldn't worry about it with your own gun. However, -following proper ettiquette- you probably should be more careful with a gun you don't own (especially a brand new floor model that you haven't paid for yet).
"The fear of death follows from the fear of life. A man who lives fully is prepared to die at any time."
Search tags for this page
h&k firearms slamming the slide
kel tec pmr 30 and tallahassee
slamming the slide on an empty chamber at a gun shop
slamming the slide on an empty chamber gun shop pissed
Click on a term to search for related topics.