DuraCoat Do-It-Yourself???
This is a discussion on DuraCoat Do-It-Yourself??? within the General Firearm Discussion forums, part of the Related Topics category; I am trying to buy a good quality DuraCoat Do-It-Yourself kit for my boyfriend for Christmas.
The trouble is, I don't know a thing about ...
-
December 13th, 2006 03:51 PM
#1
New Member
Array
DuraCoat Do-It-Yourself???
I am trying to buy a good quality DuraCoat Do-It-Yourself kit for my boyfriend for Christmas.
The trouble is, I don't know a thing about guns or DuraCoat.
Does anybody know where I might be able to order something like this from? Any info would be helpful...website, company name, etc.
Thanks!
-
December 13th, 2006 03:51 PM
Remove Ads
-
December 13th, 2006 04:00 PM
#2
Senior Member
Array
http://www.lauerweaponry.com/
they even sell a compressed air airbrush...though you can get a Tesors kit at Walmart in the model section for less money if he doesn't have a compressor.
though if he is not doing a camo job then I would also recommend the following...at least to take a look at.
Norrell's Moly Resin http://www.johnnorrellarms.com/
and
KG Gun Kote http://www.kgcoatings.com/
Last edited by raysheen; December 13th, 2006 at 04:09 PM.
-
December 13th, 2006 04:05 PM
#3
Distinguished Member
Array
"You can get more with a kind word and a gun than you can with a kind word alone." - Al Capone
The second amendment is the reset button of our Constitution.
-
December 13th, 2006 04:08 PM
#4
Moderator
Array
Welcome to the thread.
http://www.duracoat-finishes.com/
Hope this helps
-
December 14th, 2006 10:14 AM
#5
VIP Member
Array
Hi, andera. I think the best price will be directly from Lauer Custom. I recently got the kit, and am extremely pleased. Canned air, from our local hobby store runs $13-15/can, and I can get 1 complete AK-47 done with one can.
For the money, a little compressor would be well worth it if he's got more than a couple rifles(birthday?
), I've seen them on ebay for +/- $40. Be sure he reads the instructions- it takes about 1 week for the finish to be cured. You can hurry it up by putting it in the oven at 100-200 degrees for a couple of hours. If you let the pieces air dry for a day before baking, there isn't much in the way of smell.
http://www.lauerweaponry.com/index.c...irbrush%20Kits
LCW is the maker of DuraCoat. I got the Basic Airbrush kit. The only difference between the Basic and Advanced is better hose and fitting on the airbrush. You can buy these things at a hobby store to add to the basic kit later if that's a consideration.
FYI: You are a jewel among women! (;
Last edited by Rob72; December 14th, 2006 at 10:20 AM.
-
December 15th, 2006 04:52 PM
#6
New Member
Array
Thanks very much everyone for your input. I have bought the kit and feel like I made an informed decision.
I appreciate the quick response. Hope you all have a good holiday.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Similar Threads
-
By cv7713 in forum General Firearm Discussion
Replies: 11
Last Post: November 21st, 2008, 11:20 PM
-
By kurtiss in forum General Firearm Discussion
Replies: 7
Last Post: July 2nd, 2008, 08:11 PM
-
By HK Dan in forum General Firearm Discussion
Replies: 4
Last Post: December 7th, 2007, 04:30 PM
-
By glock21guy in forum Related Gear & Equipment
Replies: 3
Last Post: June 16th, 2007, 08:47 PM
-
By Mercalf in forum General Firearm Discussion
Replies: 7
Last Post: January 12th, 2007, 07:27 PM
Search tags for this page
diy duracoat kit
, diy glock duracoat
, do it yourself dura coat
, do it yourself duracoat
, do it yourself gun duracoat kits
, dura kote do it yourself kits
, duracoat ak47
, duracoat diy
, duracoat diy kit
, duracoat do it yourself
, duracoat do it yourself kit
, duracoat do it yourself kits
, duracoat for guns in maine
, duracoat glock do it your self
, who in alabama does duracoat?