Killer Beautiful .45 Grip Screws U Can Do It!
Your FIRST Home Gun Smithing Job! :biggrin:
Here is a little tiny, easy, "home gun smithing" job that you cannot mess up.
It works always works great.
If you own a Dremel tool then you can DO this!
You have spent lots of dollars on those BEAUTIFUL exotic wood or ivory grips or whatever grips...BUT, your factory grip screws look like Ka~Ka.
Even the brand new screws you bought don't look that great.
Use the 1/8" collet in your Dremel. Carefully push your grip screw down into the 1/8" open collet & just barely snug it up and you will not damage your grip screw threads at all.
Turn on your Dremel & press a small piece of 3M "Wet Or Dry" Silicon Carbide paper onto the face of your spinning grip screw.
Depending on how bad your screws are...start with about 320 or 400 paper & work your way finer to at least 600 grit or even all the way to ultra fine 1500 paper.
Stop & start your Dremel as often as you like to check your progress.
Do all 4 screws exactly the same way though.
Carefully remove each screw after you have Roto~Polished it without touching the face of the screw.
Then take an old needle nose pliers & lightly hold the screw by the threads. Don't squeeze!
I use a rubber band around the pliers handles & that is all the pressure you need just to hold the screw.
Then move the screw "screw face up" in & out of the flame of your gas stove or cook top.
If you have an electric cook top then touch the base of the screw to the red hot element.
Wave the screw in & out of the flame & you can watch your polished steel screw head slowly change colors.
The polished screw head will go from Pale Straw To Dark Straw To Light Brown & then start to turn a beautiful DEEP iridescent Blue then Deep Purple. Neat!
As soon as the screw has reached whatever desired color ~ you'll want either start blowing on it REAL HARD & QUICK or quickly quench it in distilled water.
Lastly...apply a light coat of oil.
Do all 4 screws & you now have 4 AMAZING LOOKING custom heat treated BLUE screws.
Ivory Grips and lighter wood grips look great with the golden brown screw color!
You cannot mess this up & they really compliment your custom grips.
If your grip screws are Stainless Steel then you can just give them a PERFECT "circular satin finish" or mirror bright finish & skip the heat treatment & the oil.
Let me know if you want photos but it's really simple to do.