Does anyone else own a Thomspon "tommy" gun? If so, please step in.
I just got this Thompson 1927 A-1 T1 last week and I took it to the range today for the first time and this gun was a real pain in the ass to shoot. :aargh4: I have a few questions for anyone else that has a tommy. I used 230g 45 ACP by Remington as recommended by the manufacturer.
First here's the Tommy:
First question, I used the 30 round stick to shoot my very first round. I released the bolt in it's locked position and my first round was loaded in the chamber. I aimed and pulled the trigger and nothing. :confused: WTH? I inspected the gun, checked to make sure the safety was off and attempted to fire and nothing. I did this inspection a couple more times and finally the gun fired. Is this normal on the first use? I typically except any gun to fire when ever I pull the triger. What happened?
Second question, I also have a 50 round drum, I loaded the drum per the instructions and wound the spring 9-11 clicks. Half way through spending ammo, the drum appeared to need to be wound again? :confused: The instructions didn't say that? The spring inside wasn't tight enough to push the latter half of the ammo out of the drum. Every ten rounds I had to wound it another click. Is this normal? No wonder why the GI's never used the drum in WWII.
Third, see the pictures below. Because the cartridges were not tight in the drum (see the above question as why) the cartridges started jamming in the gun's chamber. The bolt was frozen shut and after softly hitting the bolt backwards I was able to lock the bolt and release the drum. The bolt froze because of this piece which I'm not sure what it's called (seen below). What is it and why did it do this? I was able to work in back in place with a pair of pliers? Is this common?
What it should look like after I fixed it.
This gun is sooo finiky and it belongs in the Smithsonian. :aargh4:
Now that the gun is "fixed" and the bolt is not frozen, I attempted to dry fire and I don't hear that "click". :frown: I don't have time to drive to range until next weekend and I'm not sure if the gun will fire or not? I'm considering calling Kahr tomorrow regarding these problems. If anyone else owns one of these guns and can tell me what I may be doing wrong or what is happening I'd greatly appreciate it.
Thank you. :smile: