Shot Show Coverage

This is a discussion on Shot Show Coverage within the General Firearm Discussion forums, part of the Related Topics category; I just came back from SHOT today. I went there with PW, the administrator of the Beretta Forum. I pretty much tried to hit all ...

Page 3 of 3 FirstFirst 123
Results 31 to 37 of 37

Thread: Shot Show Coverage

  1. #31
    VIP Member
    Array srfl's Avatar
    Join Date
    Sep 2005
    Location
    FL
    Posts
    6,870
    I just came back from SHOT today.

    I went there with PW, the administrator of the Beretta Forum. I pretty much tried to hit all of the major firearms and LE manufacturers for a second or two and then dedicate some time talking to and/or handling some of the products. Here are some observations:

    S&W will be a force to be reckoned with. The S&W M&P40 was displayed as were the same gun chambered in 9mm and 357 SIG. The gun feels great in the hand. Unlike the Beretta Px4, it already has support from several accessory manufacturers. I plan on buying one when I can. The S&W M&P15 is made by Stag Arms according to several "trusted agents" I spoke to. S&W can make them, but admit that Stag knows what they are doing, so they went to them to produce the rifle. For you LEOs and/or security specialists, S&W will produce a new 100-series handcuff with a lever as a second locking mechanism instead of a button....that is way cool!!! I need to get me one of those when they come out!

    For you 10mm and .40 S&W fans, Taurus displayed Taurus Trackers in 10mm and .40S&W. They seemed like nice guns. They should be available later this year according to two Taurus employees I spoke to.

    I visited (and drooled at) the Steyr booth which is reintroducing their fantastic S series handguns, albeit in in their new "A1" trim. The trigger pull and reset are fantastic; better than the trigger pulls on my Steyr M and S series guns. I also played with their AUG A3's which will not be available for another 12 to 18 months (approx.) and even then may not be available for sale to private citizens (just agency/individual LEO sales). I may purchase one when they are stocked by my local LE dealer.

    A visit to Mec Gar was very productive, as I met their founder/president Edoardo Racheli who was a total gentleman. He was thrilled that I recognized their products and went to visit their booth which was unfortunately empty at times. They had a 20 round magazine for the Walther P99 (!!!) and a pre-production 18 round flush fit magazine for the Beretta 92 series (YOO HOO!) which should fit the new Beretta 90Two (more on that gun later).

    I met iShot's Helmie Ashiblie who was a great guy, as is Alan Dugger from Sprinco. Helmie displayed two pre-production bags; one a computer case and the other a super discreet carbine bag what looked very cool.

    SIGARMS had a ton of new products to include their 556 rifle which will be available to everyone (not just LEO's) some time around the end of the year. I WILL buy one of those when available. Sig Forum has photos of the rifle. Lots of new pistols were displayed to include new GSR Revolution variants for you 1911 fans, like Bruce, (including a compact version).

    CZ was there with their Dan Wesson Razorback, PM7 and Global Hunter (6" barrel), all in 10mm. No CZ-75-type 10mm's are planned though so far....bummer! The Dan Wesson Global Survivalist (5" barrel) was also there, but will (so far) only be available in .45 ACP.

    Kahr will have a TP45 which is the closest thing to a service sized pistol in their line. I met Kahr founder Justin Moon who was cool as heck. Moon will neither confirm or deny that there will be a PM45, but it will theoretically be equipped with a five-round mag.

    On to Beretta.....I was not happy with them; most of their folks there were extremely rude in my opinion. Their railed 92-variants (like the Vertec) will disappear in favor of the 90Two (booo) which will have a polymer frame with interchangeable grip assemblies and a rail. One of the two grips has a straight backstrap profile a' la Vertec, but is thicker than the Vertec...hence, it does not fit my hands. The slide-mounted decocker/safety is low profile, so "on safeing" the displayed F-variant 90Two was difficult for me. The Px4 handgun in their Type C is nice....Px4's in G (decocker, no manual safety), F (manual safety and decocker), C (Glock-type trigger with slick slide), and D (slick slide DAO) were present. Their new Rx4 rifle won't be available for about 18 more months and forget about private citizen sales...that is, so far, not planned. The Rx4 displayed there was only about "95%" complete according to one Beretta person on-hand.

    Walther will bring back the Anti Stress-triggered P99's 9mm and .40 in both full and compact sizes which is great as I love my P99AS! A great change to the P99's is the addition of a long magazine lever. It cannot be readily fitted to "older" P99's according to one Walther/S&W person on-hand since one would have to grind away material from the trigger guard to fit it.

    FN had at least two of their SCAR rifles on hand that may be produced for the civilian market down the road...maybe. It's a slick handling rifle. The F2000 bullpup with it's front ejection system was there and it's another slick rifle. According to one FN employee present, that will be available to the U.S. market for one and all; I don't recall exactly when, but sometime over the next eight months sticks to my mind. I like the way it felt a little bit more than the Steyr AUG A3, so I plan on adding one to my collection as well.

    Glock had no new products.....I managed to get into their swanky 20th anniversary banquet on Friday evening....I had a blast. Gaston Glock was there (as were every Glock honcho) and he was quite the dancer.

    There were other interesting items displayed such as a Glock replacement metal frame with replaceable backstraps and a Kel Tec single stack 9mm pistol.

    I'm sure I'm missing some great products I saw, but the aforementioned ones stick to my mind....sorry if I missed something.
    USAF: Loving Our Obscene Amenities Since 1947

  2. Remove Ads

  3. #32
    VIP Member Array Bud White's Avatar
    Join Date
    Dec 2004
    Location
    Away - Health Problems
    Posts
    17,353
    Well if the Smith is made by stag arms that says a lot ... All good

    Funny glock has said 2 years in a row something is coming and nothing ..


    All good info thanks

  4. #33
    VIP Member
    Array srfl's Avatar
    Join Date
    Sep 2005
    Location
    FL
    Posts
    6,870
    Oh...I missed HK....there were no P3000's on display which was strange. The HK 416 rifle was there and it was a beaut. I did not ask if it would ever be available for non-military/LEO sales here in the U.S.....and yes, the P7 will not be ever made again according to one HK employee on hand. She said the last ones were made and shipped to the U.S. well before SHOT but that parts should be available for a while.
    USAF: Loving Our Obscene Amenities Since 1947

  5. #34
    Assistant Administrator
    Array P95Carry's Avatar
    Join Date
    Mar 2005
    Location
    South West PA
    Posts
    25,482
    srfl - excellent feedback and thx for taking the trouble
    Chris - P95
    NRA Certified Instructor & NRA Life Member.

    "To own a gun and assume that you are armed
    is like owning a piano and assuming that you are a musician!."


    http://www.rkba-2a.com/ - a portal for 2A links, articles and some videos.

  6. #35
    Administrator
    Array QKShooter's Avatar
    Join Date
    Dec 2004
    Location
    Off Of The X
    Posts
    35,112

    Thumbs up srfl

    Boy...Thanks Much for that post up there. That was absolutely great!
    I appreciated you posting that.
    Liberty Over Tyranny Μολὼν λαβέ

  7. #36
    VIP Member
    Array srfl's Avatar
    Join Date
    Sep 2005
    Location
    FL
    Posts
    6,870
    Anytime!

    I wish I took photos though, but it's tought to beat Dr. Ken Lunde's work (mostly posted on the Sig Forum). I got to meet him as well....nice guy.
    USAF: Loving Our Obscene Amenities Since 1947

  8. #37
    Distinguished Member
    Array soonerjh's Avatar
    Join Date
    Jan 2006
    Location
    Central Oklahoma
    Posts
    1,241
    polymer P-01 at 2006 shot show

    http://www.custom-glock.com/day2/target48.html

Page 3 of 3 FirstFirst 123

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. SHOT Show coverage and other good gun blogs?
    By lmbc2 in forum General Firearm Discussion
    Replies: 6
    Last Post: January 17th, 2009, 09:44 PM
  2. Another one from the SHOT show.
    By pistolwretch in forum Defensive Carry Guns
    Replies: 16
    Last Post: February 22nd, 2008, 10:14 PM
  3. SHOT Show
    By AZ Husker in forum Member Meeting Place
    Replies: 3
    Last Post: February 1st, 2008, 05:09 PM
  4. So How's everyone able to go to Shot Show?
    By Dakotaranger in forum General Firearm Discussion
    Replies: 4
    Last Post: January 13th, 2007, 04:33 PM