Tetra Gun Products

Tetra Gun Products

This is a discussion on Tetra Gun Products within the General Firearm Discussion forums, part of the Related Topics category; What do you guys know about this stuff? I picked up some cleaner and oil from them today during the SHOT Show. The guy talked ...

Results 1 to 11 of 11
  1. #1
    1952 - 2006
    Array acparmed's Avatar
    Join Date
    Jan 2005
    Location
    Las Vegas, Nevada
    Posts
    1,371

    Tetra Gun Products

    What do you guys know about this stuff?

    I picked up some cleaner and oil from them today during the SHOT Show.

    The guy talked a good game. Has anyone actually used this stuff and if so what do you think of it?

    Thanks,
    Bob
    Heroes are people who do what has to be done, when it has to be done, regardless of the consequences

    "I like when the enemy shoots at me; then I know where the ******** are and can kill them."
    ~George Patton

    DE OPPRESSO LIBER


  2. #2
    VIP Member Array Bud White's Avatar
    Join Date
    Dec 2004
    Location
    Away - Health Problems
    Posts
    17,353
    Some people like um i've never used it hard to find round here

  3. #3
    Assistant Administrator
    Array P95Carry's Avatar
    Join Date
    Mar 2005
    Location
    South West PA
    Posts
    25,484
    I have tried the Tetra Grease Bob (tube of white stuff) - and reckon it is well up there as greases go. Use sparingly and distribute thoroughly.

    That said I am backing off from much grease use now - well, on slide rails, due to being a terrible crud magnet. So am more into Militech! these days. There are odd places within the gun where judicious use can be useful.

    My lube approach these days is ever more ''less is more''. I'd rather strip and clean that bit more often.
    Chris - P95
    NRA Certified Instructor & NRA Life Member.

    "To own a gun and assume that you are armed
    is like owning a piano and assuming that you are a musician!."


    http://www.rkba-2a.com/ - a portal for 2A links, articles and some videos.

  4. #4
    Member Array MillCreek's Avatar
    Join Date
    Dec 2005
    Location
    Snohomish County, Washington USA
    Posts
    40
    I use the Tetra Gun Grease and the Liquid Tetra PTFE lube. I like to use them on the bearing surfaces of my pistols and use a drop or two of the liquid on the lockwork of my revolvers. The liquid Tetra also makes a nice protective coating: spread a drop or two on the outside of the firearm, allow to dry and lightly wipe. This leaves a non-tacky PTFE coating.
    ___________________

    Regards,

    MillCreek
    Snohomish County, Washington USA

  5. #5
    Distinguished Member Array dimmak's Avatar
    Join Date
    Feb 2006
    Location
    TN
    Posts
    1,752
    Works fine...
    +1 on Mili-tec...
    "Ray Nagin is a colossal disappointment" - NRA/ILA Executive Director Chris W. Cox.


    "...be water, my friend."

  6. #6
    VIP Member Array CLASS3NH's Avatar
    Join Date
    Jan 2005
    Location
    Bob from Southern New Hampshire
    Posts
    4,667
    I use it on my handguns.....works very well............use sparingly............the full autos eat it up like it's candy to em..............
    Why Waltz when you can Rock-N-Roll

  7. #7
    VIP Member Array maclean3's Avatar
    Join Date
    Oct 2005
    Location
    Nashville, TN
    Posts
    3,085
    Militec lists a grease on their site too but don't see it in any size other than what appears to be "grease gun" tubes. There's a small sample tube that comes in one of their variety packs, that'd be perfect for the range bag but it doesn't seem to be available by itself.

    I'm still using the sugar cube sized vials of GI slide grease I bought at the gun show several years ago. I'd like to upgrade to something better but I don't want to buy 3 gallons of the stuff either. Any ideas?
    Jack

  8. #8
    VIP Member Array Bud White's Avatar
    Join Date
    Dec 2004
    Location
    Away - Health Problems
    Posts
    17,353
    try Brian Enos Slide Glide good stuff

    http://www.brianenos.com/pages/slide-glide.html


    there various grades i use std and it works here in winter but there's also a lighter grade for carry use

  9. #9
    Senior Moderator
    Array Tangle's Avatar
    Join Date
    Dec 2004
    Location
    Chattanooga
    Posts
    9,808
    Quote Originally Posted by Bud White
    try Brian Enos Slide Glide good stuff

    http://www.brianenos.com/pages/slide-glide.html


    there various grades i use std and it works here in winter but there's also a lighter grade for carry use
    I was ready to order some of that stuff 'til I saw:

    - All stock-type semi-auto pistols, rifles and shotguns, in normal temperatures (above 50 degrees F)

    - Slide-Glide Lite - Lightest viscosity
    All stock-type semi-auto pistols, rifles and shotguns, in cooler temperatures (below 50 degrees F)

    That makes its use very complicated since it is so temperature dependent. The temp. can easily go from below 50 to above 50 just going from inside to outside, much less seasonal changes and temp. changes throughout the day.

  10. #10
    VIP Member Array Bud White's Avatar
    Join Date
    Dec 2004
    Location
    Away - Health Problems
    Posts
    17,353
    he does make it to complicated i use

    Standard
    All stock-type semi-auto pistols, rifles and shotguns, in normal temperatures (above 50 degrees F)

    I've never had a problem even with hunting guns that have sit out in the cold .. Also for a carry gun i know it don't get under 50 degrees under my coat usually and if it does i want a new coat.


    if your really worried about it run the Lite as it says for

    Slide-Glide Lite - Lightest viscosity

    All carry guns applied extremely sparingly (for reliability)


    Again i use the Standard weight in all my guns be it glock or 1911 or anything else never had a problem

  11. #11
    VIP Member Array maclean3's Avatar
    Join Date
    Oct 2005
    Location
    Nashville, TN
    Posts
    3,085
    Thanks Bud, I might just give that a try.

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Where to buy Knoxx products?
    By xeero in forum Defensive Rifles & Shotgun Discussion
    Replies: 11
    Last Post: September 29th, 2006, 12:19 AM
  2. Gun Slick Products
    By ExSoldier in forum Related Gear & Equipment
    Replies: 3
    Last Post: March 19th, 2006, 04:46 PM
  3. Cleaning products... What's everyone using??
    By gddyup in forum Related Gear & Equipment
    Replies: 17
    Last Post: February 23rd, 2006, 03:56 AM
  4. Cleaning Products
    By Bud White in forum General Firearm Discussion
    Replies: 16
    Last Post: January 10th, 2006, 05:16 PM

Search tags for this page

buy tetra gun grease

,

how good are tetra gun products

,
is tetra gun grease any good
,

problems with tetra gun products

,

tetra gun grease where to buy

,

tetra gun products

,

tetra gun sold in las vegas nv

,

tetra white gun grease

,
where can i find tetragun products
,

where to buy tetra gun grease

,

who sells tetra grease

,

who sells tetra gun products

Click on a term to search for related topics.

» Log in

User Name:

Password:

Not a member yet?
Register Now!

» DefensiveCarry Sponsors