CNC Plasma, Router, Torch Tables

CNC Plasma, Router, Torch Tables

This is a discussion on CNC Plasma, Router, Torch Tables within the Off Topic & Humor Discussion forums, part of the The Back Porch category; Made in Texas! Prices start at $6800.00 CNC Plasma Tables, CNC Router Tables, CNC Torch Tables, CNC Water Jet Tables (512) 843-2621 Table sizes (cutting ...

Page 1 of 2 12 LastLast
Results 1 to 15 of 18
Like Tree2Likes

Thread: CNC Plasma, Router, Torch Tables

  1. #1
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13

    Talking CNC Plasma, Router, Torch Tables

    Made in Texas!

    Prices start at $6800.00

    CNC Plasma Tables, CNC Router Tables, CNC Torch Tables, CNC Water Jet Tables

    (512) 843-2621

    Table sizes (cutting area):


    2' x 4'

    4' x 4'

    4' x 8'

    5' x 10'

    Custom sizes welcome



    Standard Features:

    3 axis movement

    Torch height control for Plasma Cutting operations

    Computer with all necessary hardware

    Open design to allow easy loading of material with fork lift

    Cable Carriers

    Ball bearings and timing belt reduction

    Rack and pinion drive for x and y axis

    Gantry is driven by drive shaft from both sides for high precision movement

    CAD, Cam, and Machine Software Included!

    Plug and play system with minimal setup from customer.

    Free Training for our customers at our facility in Hutto TX.

    Free Email and Phone Support for Life!

    DSC02405.JPG1table.jpgDSC02403.JPG

    StormRhydr likes this.
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/


  2. #2
    Administrator
    Array 4Nines's Avatar
    Join Date
    Feb 2011
    Location
    Austin, TX
    Posts
    172
    Do you have any examples of targets or firearm accessories that you've cut out?

  3. #3
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  4. #4
    Administrator
    Array 4Nines's Avatar
    Join Date
    Feb 2011
    Location
    Austin, TX
    Posts
    172
    Bad ass! I'm not really on the zombie kick, but that zombie target would be fun to make and shoot
    StormRhydr likes this.

  5. #5
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  6. #6
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  7. #7
    Administrator
    Array QKShooter's Avatar
    Join Date
    Dec 2004
    Location
    Off Of The X
    Posts
    35,577
    Neat Video.
    Liberty Over Tyranny Μολὼν λαβέ

  8. #8
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  9. #9
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  10. #10
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  11. #11
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  12. #12
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13


    By Ana Murray
    Smithville Times contributing writer
    Ag Mechanics class is not what it used to be, at least not at Smithville High School. Ag Mechanics teacher Lance Hanson has a little extra pep in his step when he talks about the newest machine in his shop, a computer numeric cutting (CNC) machine from BurnTables LLC. The plasma cutter is a machine that can make intricate cuts and designs in metal sheets up to ˝” thick. The plasma cutter’s torch is controlled by a computer program that enables it to make clean sharp cuts. SHS Principal, Ron Roth, is ‘excited about the possibilities this piece of technology will offer our students.’
    In order to produce a finished piece on the plasma cutter, students first complete a design using CAD (2Dimensional/3Dimensional Computer Aided Design) software and transfer that design to a flash drive. Next they must complete a complex process using the plasma cutter’s computer program, CAM (computer aided manufacturing). I had an opportunity to watch SHS Junior, Sean Moyer, complete the process from beginning to end. Sean maneuvered through the design process using the classroom computer like a seasoned veteran.
    Once the design was ready for production Sean loaded it on the plasma cutter’s computer system (CAM) to complete the final steps before ‘burning’ the design onto a 1/8th inch sheet of steel. Sean expertly prepared the last steps which include aligning the correct axis, checking that the torch was in position, and that all settings were correct on CAM. During the process I couldn’t help but notice the amount of math, science, art, technology, and problem solving skills necessary to operate this equipment. While the plasma cutter completed the ‘burn’, Sean kept a watchful eye on the process to make certain that all systems functioned properly. The last step in project completion required Sean to sand and polish the finished design.
    The plasma cutter is also used by our Ag classes to make parts for welding projects. Sean is the student most knowledgeable in using the plasma cutter, having attended training with Mr. Hanson. Shad Scharlach, Assistant Principal at SHS, believes that the experience in using the plasma cutter will greatly enhance student’s job marketability. Sean is hoping to become a Mechanical Engineer and using the plasma cutter, along with his welding skills, gives him the confidence that he will be prepared to compete in a technology based society.
    Mr. Hanson says that students have designed their own art and have burned the Tiger T with School Board member’s names on them in the past as gifts of appreciation. Mr. Hanson is now taking custom orders for metal work, such as custom gate art, and will begin working on the projects in the coming weeks.
    Smithville ISD continues to add new opportunities to help prepare our students for their futures. The plasma cutter is just one example of a hands-on teaching tool that encompasses multiple areas of the educational curriculum.
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  13. #13
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

  14. #14
    Distinguished Member
    Array molleur's Avatar
    Join Date
    Nov 2011
    Location
    palm bay, florida
    Posts
    1,420
    I could be really dangerous with that! Broke too, as I'd "play" too much.
    Nice piece of gear!
    "Don't shout for help at night, you may wake your neighbors"

  15. #15
    New Member Array BurnTables's Avatar
    Join Date
    Aug 2013
    Location
    Hutto TX
    Posts
    13
    CNC Plasma, Router, WaterJet, & Torch Tables :D

    BurnTables.com

    (512) 843-2621
    http://www.facebook.com/BurnTables
    http://burntables.tumblr.com/

Page 1 of 2 12 LastLast

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

burn table reviews

,
burn tables cnc plasma review
,
burntables cnc plasma reviews
,
burntables cnc reviews
,
burntables plasma cnc machine reviews
,
burntables plasma cutting table review
,

burntables review

,
burntables reviews
,
cnc plasma table
,
plasma cutting tables made in texas
,
reviews on cnc plasma burn table
,
used burntables cnc plasma table
Click on a term to search for related topics.