M1911 match barrels $125 each!!

This is a discussion on M1911 match barrels $125 each!! within the Sponsor Buy, Sell & Trade forums, part of the Marketplace category; I am overstocked and selling them well BELOW DEALER COST. NOWLIN 40 END.JPG NOWLIN 40 SIDE.JPG NOWLIN Match Barrels have won the NRA BIANCHI CUP ...

Results 1 to 3 of 3

Thread: M1911 match barrels $125 each!!

  1. #1
    Sponsor
    Array DRM's Avatar
    Join Date
    Jan 2007
    Location
    Near Historic Williamsburg, Virginia
    Posts
    637

    Cool M1911 match barrels $125 each!!

    I am overstocked and selling them well BELOW DEALER COST.

    NOWLIN 40 END.JPG NOWLIN 40 SIDE.JPG

    NOWLIN Match Barrels have won the NRA BIANCHI CUP and numerous other Major Matches in record breaking style.

    Made from Heat Treated 416 Stainless Steel and ECM rifled.

    They are oversize in ALL the right places for proper Gunsmith fitting.

    They are short chambered. This is so the gunsmith can fit the barrel hood length to YOUR slide first, then deepen (ream) the chamber to .40 S&W or 10MM caliber for maximum accuracy.

    These barrels have FULLY SUPPORTED feed ramps for the famous NOWLIN/WILSON frame cut.

    Custom Shop Services:

    * These are BUSHING barrels and are 6" long. I will cut them to 5" with a 11 degree crown for +$40 each.

    * I will fit the barrel hood to your slide (just send me the slide) and chamber to .40 S&W or 10MM for $75 each.

    Complete custom 1911 Services available on request.
    IDPA 1911.JPG

    AH CLUB 100.gif
    Last edited by DRM; March 23rd, 2012 at 10:50 AM.
    "...with liberty and justice for all..."
    (Must be 18. Void where prohibited. Some restrictions may apply. Not available in all states). - D. Stanhope

    D.R. Middlebrooks - Pro Shooting Coach & Custom Gunsmith
    Tactical Shooting Academy & Custom Shop
    www.TacticalShooting.com

  2. Remove Ads

  3. #2
    Distinguished Member Array claude clay's Avatar
    Join Date
    Dec 2007
    Location
    ct
    Posts
    1,902
    just thinking....it needs a link fitted but that can be measured without the reciever, yes?
    and with a fitted front bushing and the proper bbl spring--could you have a 10mm just with swapping the bbl?
    or do things like timing and pressure nix it?

    cartrage length is fine and the mag holds 9 vs 8 of the 45's.
    Be aware, be deliberate in your actions and be accurate.
    -------------------
    Why do those elected to positions of power than work so hard
    to deny those same opportunities to the same people who empowered them

  4. #3
    Sponsor
    Array DRM's Avatar
    Join Date
    Jan 2007
    Location
    Near Historic Williamsburg, Virginia
    Posts
    637

    Lightbulb My Custom Shop Work...

    To do it right, we need to fit the barrel hood to YOUR slide & chamber it to the proper depth.

    Next we to fit the barrel feet to your frame and link it properly.

    Then we need to fit a bushing and spring it correctly for your load.

    Lastly to needs to be test fired for reliability.

    FWIW: I built a gun for a client with NOWLIN barrel and it went 150,000+ rounds before being returned to me for repair. And it only needed a new trigger job.

    AH CLUB 100.gif
    "...with liberty and justice for all..."
    (Must be 18. Void where prohibited. Some restrictions may apply. Not available in all states). - D. Stanhope

    D.R. Middlebrooks - Pro Shooting Coach & Custom Gunsmith
    Tactical Shooting Academy & Custom Shop
    www.TacticalShooting.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

11 degree crown 1911 barrel gunsmith

,

1911 45 degree barrel crowning service

,

45 degree 1911 barrel crown

,

coolm1911 for.sale

,

crowned 1911 barrel for sale

,

cut crown 11 degrees 1911

,

drm 1911 slides

,

m1911 .40 s&w barrels

,

nowlin wilson supported barrels

,

ream chamber .40 1911

Click on a term to search for related topics.