|
So, there you have it. The Basics
1. A press ( hand or bench ).
2. A stet of dies, as per Landric 3 die set is fine. CARBIDE FOR SURE.
3. A scale.
4. IMHO- If I were you I would get the Lee Powder Measure Kit for
$9.95. If you have no room for a powder thrower this will get you almost spot on for most of your loads and you can verify with the scale. This will be a lot easier than weighing each charge out on the scale.
5. A set of calipers will be something I would get. You can use this to verify that your finished cartridges are within specs and can be used for all calibers in the future.
AND MOST OF ALL A RELOADING MANUAL.
Order your powder and primers now. My primers have been on backorder for almost 2 months now.
bosco
|