View Single Post
Old July 4th, 2009, 02:45 PM   #2
Janq
VIP Member
 
Janq's Avatar
 
Join Date: Nov 2005
Posts: 4,526
Janq
Quite.

185gr DPX | 1075 fps | 475ft. lbs. | 5.0 inch barrel

https://dakotaammo.net/shop/product_...roducts_id=142
http://www.hipowersandhandguns.com/C...0.45%20ACP.htm
45 ACP Stopping Power - Shootings History
Cor-Bon DPX .45 ACP

I personally trust and depond on Corbon DPX in both this chambering and bullet weight as well as in 9MM too. Out of 5" barrels.
But for HD I do not and would not suggest it. Reason being due to it's well known capability to penetrate hard surfaces.

For HD as a pistol round I keep two mags specific to that as chambered one in Winchester 'Personal Protection' .230 gr. lead JHP while I have a second handgun loaded with Federal Hydrashok .230 gr. lead JHP.

Last thing I want is to have a round that misses penetrate the varying thickness and density skin of my residence and pierce some other persons.
The DPX bullet/projectile is by design adept at doing so while lead JHP is very much less so than that of the DPX bullet/projectile, which is basically a solid copper sabot projectile.

- Janq
__________________
"Killers who are not deterred by laws against murder are not going to be deterred by laws against guns. " - Robert A. Levy
Monday, March 12, 2007 -- Op Ed -- The Washington Post

Last edited by Janq; July 4th, 2009 at 05:25 PM..
Janq is offline   Reply With Quote