DefensiveCarry Concealed Carry Forum - View Single Post

farmerj · December 28th, 2006, 02:07 PM

I use boiling water on all my Mil-Surp Mosin guns. Especially the bolts and firing pins. Use swaps and wipes with CLP afterwards to put the protectant back on them.

You can use a hair dryer or a heat gun if you are really careful to sweat the cosmo out of the stock.

If your better half doesn't mind, set the stove on about 150-175 and set the stock in the oven. Just put something under it to catch the drippings.

December 28th, 2006, 02:07 PM	#7
farmerj Member Join Date: Jul 2006 Location: East Central MN Posts: 49	I use boiling water on all my Mil-Surp Mosin guns. Especially the bolts and firing pins. Use swaps and wipes with CLP afterwards to put the protectant back on them. You can use a hair dryer or a heat gun if you are really careful to sweat the cosmo out of the stock. If your better half doesn't mind, set the stove on about 150-175 and set the stock in the oven. Just put something under it to catch the drippings. __________________ Team WTFDTSG? ***** happens, it becomes the past. Live with it, learn from it and get on with it.