|
Everything should work just fine.
There is no shell plate, just a shell "holder" that fits into the top of the press that is case specific.
Like the shell plate on a progressive, a shell holder will usually work for more than one case, dependent on the size of the base.
The progressives have a die that the poder measure sits upon and the powder passes through it. Single stages dont have that.
All dies will work with the RCBS as long as the thread is the standard 7/8-14 threads per inch.
That awesome looking .22 case that is as big as a .300 is probably a .220 Swift if I was guessing.
__________________
AR. CHL Instr.
'It cannot be emphasized too strongly or too often that this great nation was founded not by religionists but by Christians, not on religions but on the Gospel of Jesus Christ'.
Patrick Henry
|