Whats Wrong With This Picture

RM686 · July 15th, 2007, 03:31 PM

This is a Blade Tech UCH Left Hand Holster adjusted for the FBI cant. Its not the Clip since I called the company and they sent me a new one.

Will send these pictures to company for their reply.
In the meantime if you are left handed stay away from this company.

rocky · July 15th, 2007, 04:17 PM

Guess I am missing the point? I am LH'ed . Is the clip suppose to be a tuckable?
What exactly is the problem?

CraigJS · July 15th, 2007, 04:39 PM

Looks kind of cheesie the way the holster is only attached by two small headed screws that would pull through quite easily. And the gun in that position would be mostly covered by your pants and belt leaving a VERY small area on the grip availiable to grip with your hand.
Doesn't look like a good setup. IMHO.
Be safe.

jarhead79 · July 15th, 2007, 05:16 PM

I'm not getting it??? Other than being super "deep". I could see your gun disappearing below your waistline.

dunndw · July 15th, 2007, 05:47 PM

it looks like something you pickup in the bargain bin at a pawn shop.
The attachment point looks like an afterthought
they didn't bother drilling another hole so you can carry FBI cant with all 3 cheesy attachment screws being used.

In other words...if I were in your shoes...it would be going back

purple88yj · July 15th, 2007, 06:12 PM

Looks like the holes in the clip are either too big, or they don't line up with the ones in the holster very well.

RM686 · July 15th, 2007, 06:19 PM

"I could see your gun disappearing below your waistline."

The whole gun falls below my waist line because the gun is more at a 35 to 40 degree cant. The picture on the companies website shows a correct 15 degree cant of course for a RIGHT HANDED HOLSTER. Evidently the companies engineers can only think in 2 dimensions. Mirror images must confuse then. When I called them about the problem they sent me another clip.
For $79.00 I am really pissed. Thus the warning to left handed shooter to avoid Blade Tech.

sass20485 · July 15th, 2007, 09:14 PM

Send it back, poorly designed for $79.00.

Kevin · July 15th, 2007, 10:38 PM

Just send it back

Bud White · July 15th, 2007, 10:44 PM

yep i would send it back how about a pic with ti mounted on you belt with the gun so we get a pic of how bad it is i see the cant is way to much and would be a pain to draw i think

July 15th, 2007, 03:31 PM	#1
RM686 Member Join Date: Mar 2007 Location: Florida Posts: 26	Whats Wrong With This Picture This is a Blade Tech UCH Left Hand Holster adjusted for the FBI cant. Its not the Clip since I called the company and they sent me a new one. Will send these pictures to company for their reply. In the meantime if you are left handed stay away from this company.

July 15th, 2007, 04:17 PM	#2
rocky Senior Moderator Join Date: Jan 2005 Location: MI Posts: 13,083	Guess I am missing the point? I am LH'ed . Is the clip suppose to be a tuckable? What exactly is the problem? __________________ "In matters of style, swim with the current; in matters of principle, stand like a rock." Thomas Jefferson Nemo Me Impune Lacesset Link to my kydex builds:http://rocknloadkydex.blogspot.com/

July 15th, 2007, 05:16 PM	#4
jarhead79 Distinguished Member Join Date: Dec 2005 Location: Stansbury Park, UT Posts: 1,298	I'm not getting it??? Other than being super "deep". I could see your gun disappearing below your waistline. __________________ Sig P239 9mm Bersa Thunder.45 Ruger SP101 .38 SPL Glock 36 (night sites) UBG Holsters current wait time as of 7-16-2009: 3-5 weeks.

July 15th, 2007, 05:47 PM	#5
dunndw Senior Member Join Date: Jul 2006 Location: Nashville Posts: 981	it looks like something you pickup in the bargain bin at a pawn shop. The attachment point looks like an afterthought they didn't bother drilling another hole so you can carry FBI cant with all 3 cheesy attachment screws being used. In other words...if I were in your shoes...it would be going back __________________ "If I was an extremist, our founding fathers would all be extremists," he said. "Without them, we wouldn't have our independence. We'd be a disarmed British system of feudal subjectivity." My Gun Truths Blog The Tennessee Firearms Association

July 15th, 2007, 06:12 PM	#6
purple88yj Senior Member Join Date: Jun 2006 Location: Piedmont Triad, NC Posts: 1,100	Looks like the holes in the clip are either too big, or they don't line up with the ones in the holster very well. __________________ "A simple way to take measure of a country is to look at how many want in ... And how many want out." British Prime Minister Tony Blair

July 15th, 2007, 04:39 PM	#3
CraigJS Member Join Date: Nov 2005 Location: Minnesota Posts: 197	Looks kind of cheesie the way the holster is only attached by two small headed screws that would pull through quite easily. And the gun in that position would be mostly covered by your pants and belt leaving a VERY small area on the grip availiable to grip with your hand. Doesn't look like a good setup. IMHO. Be safe.

July 15th, 2007, 06:19 PM	#7
RM686 Member Join Date: Mar 2007 Location: Florida Posts: 26	"I could see your gun disappearing below your waistline." The whole gun falls below my waist line because the gun is more at a 35 to 40 degree cant. The picture on the companies website shows a correct 15 degree cant of course for a RIGHT HANDED HOLSTER. Evidently the companies engineers can only think in 2 dimensions. Mirror images must confuse then. When I called them about the problem they sent me another clip. For $79.00 I am really pissed. Thus the warning to left handed shooter to avoid Blade Tech.

July 15th, 2007, 09:14 PM	#8
sass20485 Distinguished Member Join Date: Jul 2006 Location: Central FL Posts: 1,937	Send it back, poorly designed for $79.00.

July 15th, 2007, 10:38 PM	#9
Kevin Senior Member Join Date: Dec 2005 Location: Oklahoma Posts: 550	Just send it back __________________ www.okshooters.com

July 15th, 2007, 10:44 PM	#10
Bud White VIP Member Join Date: Dec 2004 Location: Gone from Here Posts: 17,375	yep i would send it back how about a pic with ti mounted on you belt with the gun so we get a pic of how bad it is i see the cant is way to much and would be a pain to draw i think

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode