My Pocket Holster Story (P-3AT)

ev239 · September 21st, 2007, 10:39 AM

Story about a pocket holster...

I'm not thin. Well, I'm not fat either, but I was starting to feel fat. Let me explain. I was lucky when I first got into guns a few years ago. When my wife and I were trying to determine what our first firearms were going to be we had a friend whose dad is a gun enthusiast. He was kind enough to invite us over to his house to explain some of the finer points. At the end of the visit he allowed us to take a number of his guns with us to try out at a local range. What can I say he helped fuel my own enthusiam. The guns consisted of a 4" S&W .357 Magnum, Sig P239 9mm, Ruger MarkII, and a 2" S&W .22lr Airlite. Needless to say we had a great time handling these wonderful firearms. When we returned his guns, he asked if I would be interested in purchasing the Sig. He didn't have to ask me twice. At that time I didn't even consider concealed carrying and it wasn't until much much later that I realized the significance of getting a P239 as my first gun.

Back to feeling fat... Out of the entire Sig Classic lineup, the P239 is almost ideal for concealed carry. I got my license and started carrying the only way that was really possible for me, inside the waistband. The requirements for IWB almost always include a larger pant size. For me, going out and purchasing all new pants a size larger just isn't reasonable. Yes, I already knew I need to lose a few pounds, but now it was getting ridiculous. Pants I could squeeze in before without a gun, I now didn't even get close to buttoning. I didn't want to walk the streets unarmed so I came to the conclusion that there were times when my beloved P239 wouldn't be able to accompany me.

Solution: Buy a smaller gun of course!

So that's what I did. Initially looking for a Kel-tec P11 to stick with the same caliber as my Sig, I came across a used P-3AT at a gunshow with my brother. Amazed at the size and weight of this tiny gun I bought it. For a take-any-where gun, it is about as perfect as it gets.

Now how am I going to carry it. Just shooving it into a pocket would be asking for an AD (accidental discharge). I had picked up an Uncle Mike's pocket holster, after reading a review that listed it as a best buy, for my Bersa Thunder22 and tried that out for a little while. It was a little too big and the tiny P-3AT would still print when the pocket was stretched against it while sitting. So instead of going out and buying another holster that fit, I decided to modify the one I had to be smaller and avoid printing. I first cut the bottom off to shorten it. Then I melted the frayed ends with a lighter. I then put a stitch in to close up the bottom underneath the trigger guard. I left the muzzle open to allow lint and stuff to fall out the bottom. Then I cut a piece of leather to cover the entire weapon including the grip. I used two chicago screws to attach the leather onto the bottom of the holster with the rough side out to help grab against the pocket.

Here's what the finished holster looks like:

I've been using it for a few months and it's worked exactly like it should. It's small enough to put in any of my pockets including a back pocket if I need to.

Now for those "fat" days I always have a weapon and method to carry it.

JD · September 21st, 2007, 11:05 AM

"Improvise, adapt, and overcome." You did very well, that's a slick litlte pocket number you have there!

And thanks for sharing, it'd definately got my gears turning.

sass20485 · September 21st, 2007, 11:13 AM

Nice job.

NCHornet · September 21st, 2007, 08:14 PM

Very nice indeed, but may I also suggest a nice pancake type holster and wearing the sig on your hip OWB and carry the P3AT in the front pocket.

wyo-man · September 23rd, 2007, 03:38 PM

Nice modification.

wyo-man

Rustynuts · September 23rd, 2007, 04:15 PM

Very similar to the Desantis Nemesis. I wish they had hinged in on the bottom. Makes it wider from the side.

Or for even better quality, go for K&D!

http://www.kdholsters.com/basefile/pdc.html

September 21st, 2007, 10:39 AM	#1
ev239 Member Join Date: Apr 2007 Location: Georgia Posts: 373	My Pocket Holster Story (P-3AT) Story about a pocket holster... I'm not thin. Well, I'm not fat either, but I was starting to feel fat. Let me explain. I was lucky when I first got into guns a few years ago. When my wife and I were trying to determine what our first firearms were going to be we had a friend whose dad is a gun enthusiast. He was kind enough to invite us over to his house to explain some of the finer points. At the end of the visit he allowed us to take a number of his guns with us to try out at a local range. What can I say he helped fuel my own enthusiam. The guns consisted of a 4" S&W .357 Magnum, Sig P239 9mm, Ruger MarkII, and a 2" S&W .22lr Airlite. Needless to say we had a great time handling these wonderful firearms. When we returned his guns, he asked if I would be interested in purchasing the Sig. He didn't have to ask me twice. At that time I didn't even consider concealed carrying and it wasn't until much much later that I realized the significance of getting a P239 as my first gun. Back to feeling fat... Out of the entire Sig Classic lineup, the P239 is almost ideal for concealed carry. I got my license and started carrying the only way that was really possible for me, inside the waistband. The requirements for IWB almost always include a larger pant size. For me, going out and purchasing all new pants a size larger just isn't reasonable. Yes, I already knew I need to lose a few pounds, but now it was getting ridiculous. Pants I could squeeze in before without a gun, I now didn't even get close to buttoning. I didn't want to walk the streets unarmed so I came to the conclusion that there were times when my beloved P239 wouldn't be able to accompany me. Solution: Buy a smaller gun of course! So that's what I did. Initially looking for a Kel-tec P11 to stick with the same caliber as my Sig, I came across a used P-3AT at a gunshow with my brother. Amazed at the size and weight of this tiny gun I bought it. For a take-any-where gun, it is about as perfect as it gets. Now how am I going to carry it. Just shooving it into a pocket would be asking for an AD (accidental discharge). I had picked up an Uncle Mike's pocket holster, after reading a review that listed it as a best buy, for my Bersa Thunder22 and tried that out for a little while. It was a little too big and the tiny P-3AT would still print when the pocket was stretched against it while sitting. So instead of going out and buying another holster that fit, I decided to modify the one I had to be smaller and avoid printing. I first cut the bottom off to shorten it. Then I melted the frayed ends with a lighter. I then put a stitch in to close up the bottom underneath the trigger guard. I left the muzzle open to allow lint and stuff to fall out the bottom. Then I cut a piece of leather to cover the entire weapon including the grip. I used two chicago screws to attach the leather onto the bottom of the holster with the rough side out to help grab against the pocket. Here's what the finished holster looks like: I've been using it for a few months and it's worked exactly like it should. It's small enough to put in any of my pockets including a back pocket if I need to. Now for those "fat" days I always have a weapon and method to carry it. __________________ Mine: S&W 908.....Wife's: Ruger SP101 3" ------Kahr PM9...............Sig P239 (it's her's now) ------Norinco 213...........Charter Arms Undercover Hidden Defense - Personal gun & holster designs/reviews.

September 21st, 2007, 11:05 AM	#2
JD Senior Moderator Join Date: Jun 2006 Location: Central Iowa Posts: 11,640	"Improvise, adapt, and overcome." You did very well, that's a slick litlte pocket number you have there! And thanks for sharing, it'd definately got my gears turning. __________________ Some Things Need to be Addressed... Iowa Carry.ORG: Promoting Weapons Carry Reform in Iowa Forum Customs & Courtesies

September 21st, 2007, 08:14 PM	#4
NCHornet Distinguished Member Join Date: Dec 2006 Location: Mt Airy, NC Posts: 1,840	Very nice indeed, but may I also suggest a nice pancake type holster and wearing the sig on your hip OWB and carry the P3AT in the front pocket. __________________ When Seconds Count, The Cops Are Just Minutes Away!! Carry On! NCHornet

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 21st, 2007, 11:13 AM	#3
sass20485 Distinguished Member Join Date: Jul 2006 Location: Central FL Posts: 1,937	Nice job.

September 23rd, 2007, 03:38 PM	#5
wyo-man Member Join Date: Sep 2007 Location: Wyoming Posts: 139	Nice modification. wyo-man

September 23rd, 2007, 04:15 PM	#6
Rustynuts Senior Member Join Date: May 2007 Location: Florida Posts: 636	Very similar to the Desantis Nemesis. I wish they had hinged in on the bottom. Makes it wider from the side. Or for even better quality, go for K&D! http://www.kdholsters.com/basefile/pdc.html