Comp-Tac 2 O'Clock holster

Charleton · September 27th, 2007, 02:59 PM

Has anyone had experience with Com-Tac's new (relatively) 2 O'Clock IWB holster. They say it's intended for carry in the appendix position, and I'd like to hear from anyone who's used it there.

I'm curious if the single belt clip over the pistol's trigger guard keeps the holster in a straight drop orientation. Anybody?

Thanks.

Gene.

Rustynuts · September 27th, 2007, 07:55 PM

I have one but have not used it. Decided I don't like all Kydex that well down here in Florida!

Don't really think it's worth the price. Spend a little more and get the Minotaur.

Took a look at mine and it definitely holds straight down. Single clip though so could wiggle a bit depending on the belt fit. Clip has two bolts so you could maybe remove one to get some pivot if that's what you want, but probably not recommended. Mine's for a P3AT 2nd gen, unused, if you're interested (for a fair price!)

Charleton · September 28th, 2007, 11:26 AM

Thanks, Rusty.

I am considering getting one of these holsters, but I'm a little concerned about the location of the single clip. I'm most concerned about whether its location allows the holster/pistol to rotate on the belt, in other words so that you end up with the rear sight forward and front sight back instead of aligned vertically. I'm sure I didn't explain this well, but maybe you can work out what I'm trying to say.

I hope this works out because I've used one of their CTAC holsters for years and like it very well -- I like their stuff.

I'm considering the holster for a G19, so yours wouldn't work unfortunately.

Thanks again.

Gene.

Rustynuts · September 28th, 2007, 08:26 PM

The only way it will rotate is if the clip slips off the belt. The clip itself is held rigid to the holster by two bolts.

September 27th, 2007, 02:59 PM	#1
Charleton Member Join Date: Aug 2006 Location: College Station, Texas Posts: 16	Comp-Tac 2 O'Clock holster Has anyone had experience with Com-Tac's new (relatively) 2 O'Clock IWB holster. They say it's intended for carry in the appendix position, and I'd like to hear from anyone who's used it there. I'm curious if the single belt clip over the pistol's trigger guard keeps the holster in a straight drop orientation. Anybody? Thanks. Gene. __________________ Gene Charleton

September 28th, 2007, 11:26 AM	#3
Charleton Member Join Date: Aug 2006 Location: College Station, Texas Posts: 16	Thanks, Rusty. I am considering getting one of these holsters, but I'm a little concerned about the location of the single clip. I'm most concerned about whether its location allows the holster/pistol to rotate on the belt, in other words so that you end up with the rear sight forward and front sight back instead of aligned vertically. I'm sure I didn't explain this well, but maybe you can work out what I'm trying to say. I hope this works out because I've used one of their CTAC holsters for years and like it very well -- I like their stuff. I'm considering the holster for a G19, so yours wouldn't work unfortunately. Thanks again. Gene. __________________ Gene Charleton

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 27th, 2007, 07:55 PM	#2
Rustynuts Senior Member Join Date: May 2007 Location: Florida Posts: 629	I have one but have not used it. Decided I don't like all Kydex that well down here in Florida! Don't really think it's worth the price. Spend a little more and get the Minotaur. Took a look at mine and it definitely holds straight down. Single clip though so could wiggle a bit depending on the belt fit. Clip has two bolts so you could maybe remove one to get some pivot if that's what you want, but probably not recommended. Mine's for a P3AT 2nd gen, unused, if you're interested (for a fair price!)

September 28th, 2007, 08:26 PM	#4
Rustynuts Senior Member Join Date: May 2007 Location: Florida Posts: 629	The only way it will rotate is if the clip slips off the belt. The clip itself is held rigid to the holster by two bolts.