*Official DC AR15 picture thread* - Page 6

PackerfanXD · March 22nd, 2008, 12:40 PM

Great looking rifles guys! Keep 'em coming.

aus71383 · March 22nd, 2008, 12:48 PM

BAC - SuicideHz looks like he has an MUR upper - I've got a VIS and its not bad to break down. I don't think I'll need to take it apart for anything related to cleaning except on rare occasions or if I get bored. I locks up tight when assembled. Look over on Military Morons and you can find a nice pictorial write-up that shows the break down on it. Basically you flip two levers, take out a couple screws (allen type) and you're done.

Austin

BAC · March 22nd, 2008, 01:01 PM

Awesome, thanks. VLTOR has me curious with how the VIS might improve accuracy, so whenever I get around to (read: can afford) an SPR I'm strongly considering the VIS.

I love Military Morons. Great folks.

-B

ridurall · March 22nd, 2008, 05:27 PM

I've had this Bushmaster Varminter for several years and enjoy it a lot. Great on Coyotes and prairie dogs. I've also got several 20 and 30 round loaded magazines setting on top of the vault with my M1A and AR. If they ever come to take them they will have to wait a long time before I run out of ammo. My Bushmaster will group @ .285 of an inch at 100 yards with my handloads. With 75 grain HP Black Hills ammo it will keep under 1 MOA and bucks the wind quite nicely. I sold my Colt SP-1 to fund the purchase of the Bushmaster and have never looked back. The Bushmaster is much more accurate.

PackerfanXD · March 27th, 2008, 05:53 PM

Mo · March 27th, 2008, 07:00 PM

+1 for the LWRC, Packer. I still may have to get a piston upper for my shorty AR.

JayHawker45 · March 27th, 2008, 08:04 PM

Here's my modest setup: Rock River Carbine, with Eotech and an Aimpoint 3X magnifier on an Aimpoint Twist mount with Laser Filter Unit. Now if I could just find a strike plate for the Magpul 93A2 stock...

PackerfanXD · March 27th, 2008, 08:39 PM

Quote:

Originally Posted by Mo

+1 for the LWRC, Packer. I still may have to get a piston upper for my shorty AR.

I've been considering a sbr build myself.

rathos · March 28th, 2008, 06:20 PM

Not quite as pretty as I would like, bushy 16" MI forend rails and rear flip site, aimpoint m2

Woody · March 28th, 2008, 11:17 PM

March 22nd, 2008, 12:40 PM	#51
PackerfanXD Senior Member Join Date: Jun 2006 Location: Ground zero of the invasion Posts: 653	Great looking rifles guys! Keep 'em coming. __________________ The wealthiest nation in the world with the mightiest army man has ever assembled could not stop them. Mexican 300 Free Ramos and Campion

March 22nd, 2008, 05:27 PM	#54
ridurall Senior Member Join Date: Nov 2007 Location: SW Oklahoma Posts: 687	I've had this Bushmaster Varminter for several years and enjoy it a lot. Great on Coyotes and prairie dogs. I've also got several 20 and 30 round loaded magazines setting on top of the vault with my M1A and AR. If they ever come to take them they will have to wait a long time before I run out of ammo. My Bushmaster will group @ .285 of an inch at 100 yards with my handloads. With 75 grain HP Black Hills ammo it will keep under 1 MOA and bucks the wind quite nicely. I sold my Colt SP-1 to fund the purchase of the Bushmaster and have never looked back. The Bushmaster is much more accurate. __________________ Life member NRA since 1983 I normally carry a Sig Pro .40 in a Crossbreed IWB but when necessary will switch to: Baby Eagle .40 W/Kramer holster Bersa Thunder380 Kel-Tec P3AT Skyy 9mm

March 27th, 2008, 05:53 PM	#55
PackerfanXD Senior Member Join Date: Jun 2006 Location: Ground zero of the invasion Posts: 653	__________________ The wealthiest nation in the world with the mightiest army man has ever assembled could not stop them. Mexican 300 Free Ramos and Campion

March 27th, 2008, 08:04 PM	#57
JayHawker45 Member Join Date: Jul 2006 Location: Kansas Posts: 149	Here's my modest setup: Rock River Carbine, with Eotech and an Aimpoint 3X magnifier on an Aimpoint Twist mount with Laser Filter Unit. Now if I could just find a strike plate for the Magpul 93A2 stock... __________________ Reader, suppose you were an idiot. And suppose you were a member of Congress. But, I repeat myself. ...Mark Twain: Manuscript note, c.1882.

March 28th, 2008, 06:20 PM	#59
rathos Member Join Date: Oct 2007 Location: Vancouver, WA Posts: 258	my contribution Not quite as pretty as I would like, bushy 16" MI forend rails and rear flip site, aimpoint m2 __________________ ‘‘To disarm the people is the best and most effectual way to enslave them.’’ — George Mason

March 22nd, 2008, 12:48 PM	#52
aus71383 Distinguished Member Join Date: Jan 2007 Location: United States Posts: 1,677	BAC - SuicideHz looks like he has an MUR upper - I've got a VIS and its not bad to break down. I don't think I'll need to take it apart for anything related to cleaning except on rare occasions or if I get bored. I locks up tight when assembled. Look over on Military Morons and you can find a nice pictorial write-up that shows the break down on it. Basically you flip two levers, take out a couple screws (allen type) and you're done. Austin

March 22nd, 2008, 01:01 PM	#53
BAC Senior Member Join Date: May 2007 Location: Tampa, Florida Posts: 970	Awesome, thanks. VLTOR has me curious with how the VIS might improve accuracy, so whenever I get around to (read: can afford) an SPR I'm strongly considering the VIS. I love Military Morons. Great folks. -B

March 27th, 2008, 07:00 PM	#56
Mo Member Join Date: Jul 2006 Location: Missouri, USA Posts: 183	+1 for the LWRC, Packer. I still may have to get a piston upper for my shorty AR.

March 28th, 2008, 11:17 PM	#60
Woody Member Join Date: Jan 2006 Location: Georgia, USA Posts: 121	__________________ Americans have the right and advantage of being armed – unlike the citizens of other countries whose governments are afraid to trust the people with arms. – James Madison member: NRA, SAF, GOA, USCCA GeorgiaCarry.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode