Benelli light mount?

cdwolf · June 12th, 2008, 09:34 AM

Hey guy's I know it's been covered before(couldn't find it).
I have a M1 I'm wanting to mount a 9p surefire too.
Which is a good mount for the light and a tailswitch

aus71383 · June 12th, 2008, 05:54 PM

Do you want a tape switch or do you want to use the pushbutton on the back of the light? I believe Surefire sells different tailcaps for their lights, but I don't know if they have one for the 9P type lights. I didn't see one on their website anyhow (surefire.com). For a mount I have seen some around - most are some type of two piece bolt together that clamps between the magazine tube and the barrel - often incorporating some type of rail. I'd look on MidwayUSA.com, Brownells.com for a start, but I know there are some specific Benelli 3-gun/HD accessory type stores out there too.

Austin

cdwolf · June 12th, 2008, 07:03 PM

I was looking for pressure switch tailcap, for thesurefie
I Was just wondering which brackets you have had success with personally?

I was also looking for a web shell holder that has a couple of straps around the butt.
I wanted a sidesaddle but Not so sue now .
Any great one's to recommend?

Rob72 · June 13th, 2008, 10:25 AM

The only shell carrier I used was Eagle's. Looks like they DC'd the one I liked, but this is close: Eagle Industries - Shooter's Stock Pack Shotgun

Receiver mounts seem to run about 50/50 with people having cycling problems.

June 12th, 2008, 09:34 AM	#1
cdwolf Distinguished Member Join Date: Dec 2007 Location: MS Posts: 1,667	Benelli light mount? Hey guy's I know it's been covered before(couldn't find it). I have a M1 I'm wanting to mount a 9p surefire too. Which is a good mount for the light and a tailswitch __________________ GUN CONTROL= I WANT TO BE THE ONE IN CONTROL OF THE GUN A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

June 12th, 2008, 07:03 PM	#3
cdwolf Distinguished Member Join Date: Dec 2007 Location: MS Posts: 1,667	I was looking for pressure switch tailcap, for thesurefie I Was just wondering which brackets you have had success with personally? I was also looking for a web shell holder that has a couple of straps around the butt. I wanted a sidesaddle but Not so sue now . Any great one's to recommend? __________________ GUN CONTROL= I WANT TO BE THE ONE IN CONTROL OF THE GUN A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

June 12th, 2008, 05:54 PM	#2
aus71383 Distinguished Member Join Date: Jan 2007 Location: United States Posts: 1,685	Do you want a tape switch or do you want to use the pushbutton on the back of the light? I believe Surefire sells different tailcaps for their lights, but I don't know if they have one for the 9P type lights. I didn't see one on their website anyhow (surefire.com). For a mount I have seen some around - most are some type of two piece bolt together that clamps between the magazine tube and the barrel - often incorporating some type of rail. I'd look on MidwayUSA.com, Brownells.com for a start, but I know there are some specific Benelli 3-gun/HD accessory type stores out there too. Austin

June 13th, 2008, 10:25 AM	#4
Rob72 VIP Member Join Date: May 2005 Location: OKC, OK Posts: 2,903	The only shell carrier I used was Eagle's. Looks like they DC'd the one I liked, but this is close: Eagle Industries - Shooter's Stock Pack Shotgun Receiver mounts seem to run about 50/50 with people having cycling problems.