phantom1984

I have a beretta 21a that when shooting it the round stops at the top of the barrel instead of going inside of the barrel Ive cleaned it oiled it the mags seem to be in good working order. What could be causing this? Any Ideas?If i have put this in the wrong section Im sorry Would one of the mods please put this post in the proper section?

__________________
Better to have it and not need it than to need it and not have it.

jhh3rd

Is this a .22lr or aa .25acp model? I had a .22 model and spent a fortune on ammo trying to get it to work. The .25acp model is much more reliable. Maybe call Beretta and see what they say. I don't know what else to advise as I tried polishing, cleaning, oiling, and brand after brand of ammo. The .25acp ammo IS more expensive but has always worked well in my other models, 21a, 20, 950BS. Good luck and let us know if you follow up with Beretta. john

phantom1984

It's a 22 LR Ive had it for 2 years and up till this weekend never had a problem with it. It happens once ever mag. about the 2nd or 3rd bullet instead of chambering it hits the top of the barrel

__________________
Better to have it and not need it than to need it and not have it.

jhh3rd

Does it do it with different mags and different ammo?

frankmako

i got two of them and both were pains untill i found what ammo they liked. one of them i have to load one round less to make it feed around the second or third round. the other i don't. they work better if the are clean and oiled. check the front of the mag to see if it is slowing down the round. take the mag apart and clean the insides. cleaning the insides of the mag help also. so try to load one less round in the mag to check and break down and clean the mag.

__________________
An armed man is a citizen. An unarmed man is a subject.

Red State State of Mind