Ceramic Gun Kote Finish

QKShooter · April 25th, 2006, 10:34 PM

The latest in Gun Tough Coatings...CERAMIC!

Here is The Battleship Gray....kinda nice. I like it.

$100.00 bucks for a pistol.

DVCUSTOM GUN-KOTE
A DURABLE POLYMER FINISH FOR ALL GUNS

DVCUSTOM GUN-KOTE WITHSTANDS 500 HOURS OF 5% SALT SPRAY AND TEMPERATURES FROM -250 F TO 500 F.

IT RESISTS, FUELS, ALKALINE CLEANERS AND MOST ACIDS.

DVCUSTOM GUN-KOTE IS EXTREMELY TOUGH, IMPACT AND SCRATCH RESISTANT.

IT HAS GREAT LUBRICATING QUALITIES.

IT MEETS ALL US AND FOREIGN MILITARY DRY FIRE REQUIREMENTS.

IF YOU USE FIREARMS IN A CORROSIVE ATMOSPHERE, DVCUSTOM GUN-KOTE WILL SAVE YOU MONEY IN MAINTENANCE COSTS.
STANDARD COLORS AVAILABLE:
FLAT BLACK, FLAT GREEN, FLAT DARK GREY, SEMI-GLOSS BROWN, SEMI-GLOSS BLACK SEMI-GLOSS GREEN, SEMI-GLOSS DARK GRAY, STAINLESS STEEL, SEMI-GLOSS TAN, SILVER

PRICES: Complete Pistol-$100;
AR-15 -$250;
870 Remington Shot Gun-$200
CUSTOM COLORS AVAILABLE FOR AN ADDITIONAL COST

CLICK HERE TO VISIT THE SITE

MORE COLORS CLICK HERE...SMALLER PICS THOUGH.

P95Carry · April 25th, 2006, 10:38 PM

Looks good QK - and appears to be very resistant to stuff.

If durable as Tenifer or Black T etc then worthy of consideration. That color in the pic quite nice but I think I'd plump for flat dark grey.

Thx for the info.

Rock and Glock · April 25th, 2006, 10:43 PM

Toughness would be important. The light grey with those Wilson grips is pretty!

I saw a Glock in hot pink a couple of weeks ago.....

QKShooter · April 25th, 2006, 10:46 PM

Not sure if it would be as tough a tenifer.

My experience with regular Gun Kote is that it stays looking great much longer if the sharp edges of the firearm are "Melted" AKA Broken for carry.

I'm guessing that the addition of ceramic would make it much more scuff resistant.

April 25th, 2006, 10:34 PM	#1
QKShooter Assistant Administrator Join Date: Dec 2004 Location: Off Of The X Posts: 20,463	Ceramic Gun Kote Finish The latest in Gun Tough Coatings...CERAMIC! Here is The Battleship Gray....kinda nice. I like it. $100.00 bucks for a pistol. DVCUSTOM GUN-KOTE A DURABLE POLYMER FINISH FOR ALL GUNS DVCUSTOM GUN-KOTE WITHSTANDS 500 HOURS OF 5% SALT SPRAY AND TEMPERATURES FROM -250 F TO 500 F. IT RESISTS, FUELS, ALKALINE CLEANERS AND MOST ACIDS. DVCUSTOM GUN-KOTE IS EXTREMELY TOUGH, IMPACT AND SCRATCH RESISTANT. IT HAS GREAT LUBRICATING QUALITIES. IT MEETS ALL US AND FOREIGN MILITARY DRY FIRE REQUIREMENTS. IF YOU USE FIREARMS IN A CORROSIVE ATMOSPHERE, DVCUSTOM GUN-KOTE WILL SAVE YOU MONEY IN MAINTENANCE COSTS. STANDARD COLORS AVAILABLE: FLAT BLACK, FLAT GREEN, FLAT DARK GREY, SEMI-GLOSS BROWN, SEMI-GLOSS BLACK SEMI-GLOSS GREEN, SEMI-GLOSS DARK GRAY, STAINLESS STEEL, SEMI-GLOSS TAN, SILVER PRICES: Complete Pistol-$100; AR-15 -$250; 870 Remington Shot Gun-$200 CUSTOM COLORS AVAILABLE FOR AN ADDITIONAL COST CLICK HERE TO VISIT THE SITE MORE COLORS CLICK HERE...SMALLER PICS THOUGH.

April 25th, 2006, 10:38 PM	#2
P95Carry Assistant Administrator Join Date: Mar 2005 Location: South West PA Posts: 25,400	Looks good QK - and appears to be very resistant to stuff. If durable as Tenifer or Black T etc then worthy of consideration. That color in the pic quite nice but I think I'd plump for flat dark grey. Thx for the info. __________________ Chris - P95 NRA Certified Instructor & NRA Life Member. "To own a gun and assume that you are armed is like owning a piano and assuming that you are a musician!." If a BG dies as the result of pointing a gun at me, then he has merely succumbed to an occupational hazard of being a thug

April 25th, 2006, 10:43 PM	#3
Rock and Glock VIP Member Join Date: Nov 2005 Location: Colorado at 9,500' Posts: 3,906	Toughness would be important. The light grey with those Wilson grips is pretty! I saw a Glock in hot pink a couple of weeks ago..... __________________ Richard NRA Life Member "I saw the angel in the marble and carved until I set him free." Michelangelo Buonarroti

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

April 25th, 2006, 10:46 PM	#4
QKShooter Assistant Administrator Join Date: Dec 2004 Location: Off Of The X Posts: 20,463	Not sure if it would be as tough a tenifer. My experience with regular Gun Kote is that it stays looking great much longer if the sharp edges of the firearm are "Melted" AKA Broken for carry. I'm guessing that the addition of ceramic would make it much more scuff resistant.