reply from smith n wesson - Page 2

Rob72 · May 9th, 2006, 12:29 PM

I would suggest reading up on the Glock $0.25 trigger job, learning to detail strip your pistol, and applying the same concepts. Flitz and a muslin/felt bob, or even the med-fine rubber polishing tips won't damage your parts, unless you go crazy. Hint: don't "round" sharp edges, but lightly "break" the edge to make sure things are smooth. Flat surfaces should **SHINE**. Follow up with a Wolff kit, and I'm pretty sure you'll be much happier.

rocky · May 9th, 2006, 12:36 PM

I wouldn't screw with a carry gun. either let a smith fix it or buy a diffrent handgun. Nothing wrong with poly framed pistols, you just got a poor example compared to a Glock or similar.

Bud White · May 9th, 2006, 12:59 PM

Quote:

Originally Posted by Rob72

I would suggest reading up on the Glock $0.25 trigger job, learning to detail strip your pistol, and applying the same concepts. Flitz and a muslin/felt bob, or even the med-fine rubber polishing tips won't damage your parts, unless you go crazy. Hint: don't "round" sharp edges, but lightly "break" the edge to make sure things are smooth. Flat surfaces should **SHINE**. Follow up with a Wolff kit, and I'm pretty sure you'll be much happier.

Isnt quite as easy as that on a sigma trust me im talking from exp here

David III · May 9th, 2006, 04:50 PM

The Wolff spring makes a big difference in a Sigma. Just be sure to check/test with your carry ammo - should be fine, but the spring does reduce the striker's hit on the firing pin.
I put one in a friend's pistol, and after 30 minutes of figuring out how to disassemble the thing, it was about a one-minute job...... which is usual for me.

May 9th, 2006, 12:36 PM	#12
rocky Senior Moderator Join Date: Jan 2005 Location: MI Posts: 12,046	I wouldn't screw with a carry gun. either let a smith fix it or buy a diffrent handgun. Nothing wrong with poly framed pistols, you just got a poor example compared to a Glock or similar. __________________ "In matters of style, swim with the current; in matters of principle, stand like a rock." Thomas Jefferson Nemo Me Impune Lacesset Link to my kydex builds:http://rocknloadkydex.blogspot.com/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

May 9th, 2006, 12:29 PM	#11
Rob72 VIP Member Join Date: May 2005 Location: OKC, OK Posts: 3,108	I would suggest reading up on the Glock $0.25 trigger job, learning to detail strip your pistol, and applying the same concepts. Flitz and a muslin/felt bob, or even the med-fine rubber polishing tips won't damage your parts, unless you go crazy. Hint: don't "round" sharp edges, but lightly "break" the edge to make sure things are smooth. Flat surfaces should SHINE. Follow up with a Wolff kit, and I'm pretty sure you'll be much happier.

May 9th, 2006, 04:50 PM	#14
David III Senior Member Join Date: Nov 2005 Location: Sturgeon, MO Posts: 745	The Wolff spring makes a big difference in a Sigma. Just be sure to check/test with your carry ammo - should be fine, but the spring does reduce the striker's hit on the firing pin. I put one in a friend's pistol, and after 30 minutes of figuring out how to disassemble the thing, it was about a one-minute job...... which is usual for me.