Tuff Products Revolver Quick Strips: Initial Observations

Stephen A. Camp · February 27th, 2009, 11:48 PM

Hello. On Feb. 23rd, I ordered four packages of Tuff Products' "Quick Strips" for .44/.45/.460 and .410 Shotgun at $8.49 per pack. I did this on-line and communication and purchase verification were 1st-rate. My order arrived in today's mail, four days since the order was placed.

The Quick Strips come two to a package. (Product # 7002-BP-44)

Like many here, I've used Bianchi's excellent "Speed Strips" with my .38/.357 revolvers but until recently didn't know of any similar products for my heavier caliber wheelguns.

The Quick Strips are very, very similar in appearance to the better-known Speed Strips.

Shown are two Tuff Products Quick Strips. The front one is holding Winchester .44 Special Silvertips. The rear is loaded with Speer .45 Colt Gold Dots.

Neither caliber was difficult at all to load into the Quick Strip. I carried 4-strips around for 5 hours. Two were loaded with .44 Specials and two with .45 Colt. I put one strip of each caliber in my front pant pockets and one of each in my two hip pockets. One round of .44 Special came loose from the Quick Strip in my left front pocket. This was not a surprise as I've had the same thing happen now and again with Bianchi's Speed Strips in the past when they were just stuck in a pocket.

More of us are probably familiar with Bianchi's Speed Strip (front) than the Tuff Product's Quick Strip (rear). The Speed Strip is loaded with .38 Special and the Quick Strip, .45 Colt. These Quick Strips are by necessity larger and therefore slightly less convenient that the Speed Strips in my opinion. I emphatically am NOT saying that this is any sort of major problem.

The Quick Strips worked exactly as the Speed Strips have for years. They have the same "feel" when doing this as have the Speed Strips in my admittedly subjective observation. I found them neither harder or easier to use. If you can use a Bianchi Speed Strip, I'll bet you can use the Quick Strip with the same efficiency.

When I carry a revolver like this Taurus Model 431, I've always carried at least one HKS Speedloader with it. It's nice to have a choice for large-caliber revolver shooters can now tote extra ammunition via a Quick Strip instead or in addition to a speedloader.

Though I didn't photograph them, the Quick Stop also works with .45 Auto Rim.

I am not associated with Tuff Products in any form or fashion other than this purchase already mentioned.

If you are interested, take a look at their site here:

Tuff Products , or contact via email at:

nattstevens@tuffproducts.com

Phone: 877 883 3776

Best.

ilts · February 28th, 2009, 08:11 AM

I just bought a set of "quick strips" myself I am very pleased with them.I use them with .44spl ammo. GREAT PRODUCT

Stephen A. Camp · March 4th, 2009, 10:01 AM

Hello. Since the initial report was done, it appears that these strips do not work well with .45 AutoRim. I suspect that it is the thicker rims but in any event, loaded rounds come loose when the strip is carried in the pocket.

Best.

pgrass101 · March 4th, 2009, 10:14 AM

Great review Stephen

Superhouse 15 · March 7th, 2009, 06:40 PM

I ordered mine after reading about them here. Some for .44spl, some for a friend with a Judge, and a pre-order of the .22LR version. Got them in 5 days. They have a special on shipping now, buy 3 sets, get free shipping.

Stephen A. Camp · March 25th, 2009, 01:24 AM

Hello. Recently an order I placed for Tuff Products' carrying pouches for their Quick Strips came in.

Both of these nylon pouches can carry either one or two of the larger caliber Quick Strips. They can be had in your basic black or "coyote brown".

Tuff Products didn't spare either the thread or the velcro when creating these ammunition-carrying pouches.

This black pouch is carrying two Quick Strips that are each carrying six .44 Special Corbon DPX cartridges. The pouch has a very secure feel to it and that it is sturdy becomes evident quickly.(You can see the tab ends of the Quick Strips on the left side of the pouch.)

The Tuff Products' Quick Strip pouch covers use very generously-sized velcro closures. These are just not likely to be a problem accidentally opening. They do make that "velcro sound" for lack of a better description, when being opened, but I'm just not sure that there is a way around that! (Stitching beneath the the opened cover is also visible in this picture. These pouches should be plenty tough enough for continuous long-term use.)The pouch in this picture is holding a single strip of .44 Special ammunition, though it is capable of holding two.

A full-capacity "load" for the Tuff Products' Double Quick Strip Pouch is indeed two strips, each with six rounds but two more loose rounds can be carried in what the company calls "a secret pouch on the inside bottom"!

I apologize but I did not think to photograph the extra two rounds at the inside bottom! (You can easily see where they go!)

In this picture, you can see the two elastic pouches in which each Quick Strip fits.

Here is a view of the double pouch from the side.

Here is how the double pouch appears on the belt. It will fit belts up to 2" in width according to the company's literature. The belt in the picture is from Mitch Rosen as made for Dillon Precision. The Tuff Products' pouch does not have slots. You just wrap the pouch around the belt and close it. The back of what is the pouch's cover slides up behind the belt and over to close. The pouch is quick and easy to remove without undoing the belt.

In this picture, you can see the two .44 Special-laden Quick Strips in the company's double pouch from the top. The pouch didn't accidentally lean open and dump the strips despite being open with the cover tucked behind the belt for better viewing of the two strips. Tuff Products states that this is due to their using "two military grade vertical bartacks." Now I wouldn't know a bartack if it bit me on the backside, but I think that these are what appear to be very heavy, vertical stitching on each end of the front of the pouch near the bottom. In any event, I didn't experience problems with the double pouches, spilling their strips when opened.

I found that when practicing getting a Quick Strip at maximum speed, I sometimes accidentally grabbed both or got one while the other came out of the pouch and fell to the floor! I guess this comes from years of using only pouches capable of carrying but a single strip! I suspect that with practice, any similar "problems" can be overcome. If this is a concern, the company offers these pouches designed to carry one Quick Strip or just load one strip in the double pouch.

You can see Tuff Products' information on their available Quick Strip pouches (both single and double) here:

Concealment*::*Tuff Products

For decades now, using flat-profile ammo strips and carriers has been pretty much limited to .38's and .357's. With the introduction of Tuff Products' Quick Strips for larger calibers and now, the carry pouches, big-bore revolver fans are no longer left out.

It is my understanding that a leather pouch for carrying Quick Strips is being considered by the folks at Tuff Products right now.

If interested, take a look at Tuff Products here:

Tuff Products

Based on what I've seen so far, this company is turning out quality products. I have not had time to try Tuff Products' Quick Strips and carry pouches out "long-term" but I bet that they hold the mark and toe the line. I'll report back in a few months should there be any "need". I doubt that there will be...

Best.

Stephen A. Camp · May 5th, 2009, 06:24 PM

Hello. The good folks at Tuff Products responded to the call for a .41 Magnum Quick Strip shortly after their .44/.45 series hit the market and I am happy to report that these will be available in the very, very near future.

This Quick Reloading Strip is for the .41 Magnum and obviously holds six cartridges. I loaded this strip and carried it loose in Docker-type pants in a front pocket for 4 hours. All of the cartridges remained in the strip. Note the "bumps" on the tab at the end of the strip. They provide a very nice "grip" when using the strip.

Of course there is no need to carry these strips loose since the company offers carrier pouches for them.

This pouch will hold two Tuff Quick Strips, but works fine with only one if you choose. It works just as great with the .41 Magnums as it did with .44 Specials and .45 Colt rounds.

Closed, the Tuff Products ammo pouch is both secure on the belt and unobtrusive. This would be of less importance in the hunting field than would be the case in urban jungles where extra ammunition might need to be quickly at hand.

If you already have the .44/.45 Strips, don't worry about getting them confused with those for the .41 Magnum. Tuff Products very neatly marks the appropriate ammo for their Quick Strip on its back. Nice touch in my opinion.

Tuff Products' Quick Reloading Strips are currently available for .44 Special/Magnum, .45 Colt, each holding six cartridges as well as one for .22 rimfire which holds ten and eight rounds in a strip for .327 Magnum. (It should be noted that the .44/.45 strips work with .410 Shotgun shells and the .460!) Other strips fit the following: .475 Linebaugh, .480 Ruger and the mighty .500 S&W. They are available in .38/.357 as well...but with eight rounds as opposed to the competition's six.

The .41 Magnum strips are expected to be ready for sale around the middle of May as are strips for .45 Auto Rim! If you want to pre-order, a simple explanation is at Tuff Products' site and there is certainly no "requirement" to do so.

Take a look at Tuff Products at Tuff Products for prices and other products you might be interested in.

Questions should be sent to Mr. Natt Stevens at:

NattStevens@tuffproducts.com

I am not associated with this company in any way but have to say that I've been very positively impressed with their Quick Strips and carry pouches. In my opinion, prices are not outlandish for the strips (two per package) and they simply do what they are supposed to do: carry conveniently and allow quicker reloading of extra revolver ammunition.

I own but one .41 Magnum, a "shooter grade" S&W Model 58. Though I have a speedloader or two for it, I am very favorably impressed with Tuff Products' Quick Strips for it and will be using them in conjunction with their carry pouches in the future due to the "low profile" and convenience.

As a frequent revolver shooter/user, I appreciate having these reloading strips available in other than the .38/.357 version that has been around for decades.

Best.

Superhouse 15 · May 6th, 2009, 09:52 AM

I just got the .22LR 10 round strips in the mail. Great companion for .22 revolvers used on the trail, as a small game gun, hunting backup, etc. These folks have great stuff and great service, too.

djturnz · May 22nd, 2009, 10:03 AM

Do "speed strips" work well with single action revolvers? I'd imagine the end round would go in easily, but I'm not sure about after that. Maybe not enough clearance.

How well would the pouches work as a "dump pouch" for loose rounds?

Stephen A. Camp · May 22nd, 2009, 11:28 AM

I have not tried them with single-action revolvers so I cannot answer on that. The pouches do work as dump pouches.

Best.

February 27th, 2009, 11:48 PM	#1
Stephen A. Camp Member Join Date: Aug 2005 Location: Texas Posts: 460	Tuff Products Revolver Quick Strips: Initial Observations Hello. On Feb. 23rd, I ordered four packages of Tuff Products' "Quick Strips" for .44/.45/.460 and .410 Shotgun at $8.49 per pack. I did this on-line and communication and purchase verification were 1st-rate. My order arrived in today's mail, four days since the order was placed. The Quick Strips come two to a package. (Product # 7002-BP-44) Like many here, I've used Bianchi's excellent "Speed Strips" with my .38/.357 revolvers but until recently didn't know of any similar products for my heavier caliber wheelguns. The Quick Strips are very, very similar in appearance to the better-known Speed Strips. Shown are two Tuff Products Quick Strips. The front one is holding Winchester .44 Special Silvertips. The rear is loaded with Speer .45 Colt Gold Dots. Neither caliber was difficult at all to load into the Quick Strip. I carried 4-strips around for 5 hours. Two were loaded with .44 Specials and two with .45 Colt. I put one strip of each caliber in my front pant pockets and one of each in my two hip pockets. One round of .44 Special came loose from the Quick Strip in my left front pocket. This was not a surprise as I've had the same thing happen now and again with Bianchi's Speed Strips in the past when they were just stuck in a pocket. More of us are probably familiar with Bianchi's Speed Strip (front) than the Tuff Product's Quick Strip (rear). The Speed Strip is loaded with .38 Special and the Quick Strip, .45 Colt. These Quick Strips are by necessity larger and therefore slightly less convenient that the Speed Strips in my opinion. I emphatically am NOT saying that this is any sort of major problem. The Quick Strips worked exactly as the Speed Strips have for years. They have the same "feel" when doing this as have the Speed Strips in my admittedly subjective observation. I found them neither harder or easier to use. If you can use a Bianchi Speed Strip, I'll bet you can use the Quick Strip with the same efficiency. When I carry a revolver like this Taurus Model 431, I've always carried at least one HKS Speedloader with it. It's nice to have a choice for large-caliber revolver shooters can now tote extra ammunition via a Quick Strip instead or in addition to a speedloader. Though I didn't photograph them, the Quick Stop also works with .45 Auto Rim. I am not associated with Tuff Products in any form or fashion other than this purchase already mentioned. If you are interested, take a look at their site here: Tuff Products , or contact via email at: nattstevens@tuffproducts.com Phone: 877 883 3776 Best. __________________ Drop by www.hipowersandhandguns.com and http://hipowers-handguns.blogspot.com/

February 28th, 2009, 08:11 AM	#2
ilts Member Join Date: Nov 2007 Location: lost in ny state Posts: 20	I just bought a set of "quick strips" myself I am very pleased with them.I use them with .44spl ammo. GREAT PRODUCT __________________ Always be alert and aware!!!

March 4th, 2009, 10:01 AM	#3
Stephen A. Camp Member Join Date: Aug 2005 Location: Texas Posts: 460	Hello. Since the initial report was done, it appears that these strips do not work well with .45 AutoRim. I suspect that it is the thicker rims but in any event, loaded rounds come loose when the strip is carried in the pocket. Best. __________________ Drop by www.hipowersandhandguns.com and http://hipowers-handguns.blogspot.com/

March 4th, 2009, 10:14 AM	#4
pgrass101 Moderator Join Date: Sep 2006 Location: Alabama Posts: 7,654	Great review Stephen __________________ Noli nothis permittere te terere "If ignorance is bliss then shouldn’t most people happy?" -Thomas Jefferson-

March 7th, 2009, 06:40 PM	#5
Superhouse 15 Distinguished Member Join Date: Aug 2006 Location: Florida Posts: 1,509	Special on shipping I ordered mine after reading about them here. Some for .44spl, some for a friend with a Judge, and a pre-order of the .22LR version. Got them in 5 days. They have a special on shipping now, buy 3 sets, get free shipping.

March 25th, 2009, 01:24 AM	#6
Stephen A. Camp Member Join Date: Aug 2005 Location: Texas Posts: 460	Got the Tuff Products' (Ammunition) Pouches.... Hello. Recently an order I placed for Tuff Products' carrying pouches for their Quick Strips came in. Both of these nylon pouches can carry either one or two of the larger caliber Quick Strips. They can be had in your basic black or "coyote brown". Tuff Products didn't spare either the thread or the velcro when creating these ammunition-carrying pouches. This black pouch is carrying two Quick Strips that are each carrying six .44 Special Corbon DPX cartridges. The pouch has a very secure feel to it and that it is sturdy becomes evident quickly.(You can see the tab ends of the Quick Strips on the left side of the pouch.) The Tuff Products' Quick Strip pouch covers use very generously-sized velcro closures. These are just not likely to be a problem accidentally opening. They do make that "velcro sound" for lack of a better description, when being opened, but I'm just not sure that there is a way around that! (Stitching beneath the the opened cover is also visible in this picture. These pouches should be plenty tough enough for continuous long-term use.)The pouch in this picture is holding a single strip of .44 Special ammunition, though it is capable of holding two. A full-capacity "load" for the Tuff Products' Double Quick Strip Pouch is indeed two strips, each with six rounds but two more loose rounds can be carried in what the company calls "a secret pouch on the inside bottom"! I apologize but I did not think to photograph the extra two rounds at the inside bottom! (You can easily see where they go!) In this picture, you can see the two elastic pouches in which each Quick Strip fits. Here is a view of the double pouch from the side. Here is how the double pouch appears on the belt. It will fit belts up to 2" in width according to the company's literature. The belt in the picture is from Mitch Rosen as made for Dillon Precision. The Tuff Products' pouch does not have slots. You just wrap the pouch around the belt and close it. The back of what is the pouch's cover slides up behind the belt and over to close. The pouch is quick and easy to remove without undoing the belt. In this picture, you can see the two .44 Special-laden Quick Strips in the company's double pouch from the top. The pouch didn't accidentally lean open and dump the strips despite being open with the cover tucked behind the belt for better viewing of the two strips. Tuff Products states that this is due to their using "two military grade vertical bartacks." Now I wouldn't know a bartack if it bit me on the backside, but I think that these are what appear to be very heavy, vertical stitching on each end of the front of the pouch near the bottom. In any event, I didn't experience problems with the double pouches, spilling their strips when opened. I found that when practicing getting a Quick Strip at maximum speed, I sometimes accidentally grabbed both or got one while the other came out of the pouch and fell to the floor! I guess this comes from years of using only pouches capable of carrying but a single strip! I suspect that with practice, any similar "problems" can be overcome. If this is a concern, the company offers these pouches designed to carry one Quick Strip or just load one strip in the double pouch. You can see Tuff Products' information on their available Quick Strip pouches (both single and double) here: Concealment::Tuff Products For decades now, using flat-profile ammo strips and carriers has been pretty much limited to .38's and .357's. With the introduction of Tuff Products' Quick Strips for larger calibers and now, the carry pouches, big-bore revolver fans are no longer left out. It is my understanding that a leather pouch for carrying Quick Strips is being considered by the folks at Tuff Products right now. If interested, take a look at Tuff Products here: Tuff Products Based on what I've seen so far, this company is turning out quality products. I have not had time to try Tuff Products' Quick Strips and carry pouches out "long-term" but I bet that they hold the mark and toe the line. I'll report back in a few months should there be any "need". I doubt that there will be... Best. __________________ Drop by www.hipowersandhandguns.com and http://hipowers-handguns.blogspot.com/

May 5th, 2009, 06:24 PM	#7
Stephen A. Camp Member Join Date: Aug 2005 Location: Texas Posts: 460	.41 Magnums Coming Soon! (.45 Auto Rim, too!) Hello. The good folks at Tuff Products responded to the call for a .41 Magnum Quick Strip shortly after their .44/.45 series hit the market and I am happy to report that these will be available in the very, very near future. This Quick Reloading Strip is for the .41 Magnum and obviously holds six cartridges. I loaded this strip and carried it loose in Docker-type pants in a front pocket for 4 hours. All of the cartridges remained in the strip. Note the "bumps" on the tab at the end of the strip. They provide a very nice "grip" when using the strip. Of course there is no need to carry these strips loose since the company offers carrier pouches for them. This pouch will hold two Tuff Quick Strips, but works fine with only one if you choose. It works just as great with the .41 Magnums as it did with .44 Specials and .45 Colt rounds. Closed, the Tuff Products ammo pouch is both secure on the belt and unobtrusive. This would be of less importance in the hunting field than would be the case in urban jungles where extra ammunition might need to be quickly at hand. If you already have the .44/.45 Strips, don't worry about getting them confused with those for the .41 Magnum. Tuff Products very neatly marks the appropriate ammo for their Quick Strip on its back. Nice touch in my opinion. Tuff Products' Quick Reloading Strips are currently available for .44 Special/Magnum, .45 Colt, each holding six cartridges as well as one for .22 rimfire which holds ten and eight rounds in a strip for .327 Magnum. (It should be noted that the .44/.45 strips work with .410 Shotgun shells and the .460!) Other strips fit the following: .475 Linebaugh, .480 Ruger and the mighty .500 S&W. They are available in .38/.357 as well...but with eight rounds as opposed to the competition's six. The .41 Magnum strips are expected to be ready for sale around the middle of May as are strips for .45 Auto Rim! If you want to pre-order, a simple explanation is at Tuff Products' site and there is certainly no "requirement" to do so. Take a look at Tuff Products at Tuff Products for prices and other products you might be interested in. Questions should be sent to Mr. Natt Stevens at: NattStevens@tuffproducts.com I am not associated with this company in any way but have to say that I've been very positively impressed with their Quick Strips and carry pouches. In my opinion, prices are not outlandish for the strips (two per package) and they simply do what they are supposed to do: carry conveniently and allow quicker reloading of extra revolver ammunition. I own but one .41 Magnum, a "shooter grade" S&W Model 58. Though I have a speedloader or two for it, I am very favorably impressed with Tuff Products' Quick Strips for it and will be using them in conjunction with their carry pouches in the future due to the "low profile" and convenience. As a frequent revolver shooter/user, I appreciate having these reloading strips available in other than the .38/.357 version that has been around for decades. Best. __________________ Drop by www.hipowersandhandguns.com and http://hipowers-handguns.blogspot.com/

May 6th, 2009, 09:52 AM	#8
Superhouse 15 Distinguished Member Join Date: Aug 2006 Location: Florida Posts: 1,509	I just got the .22LR 10 round strips in the mail. Great companion for .22 revolvers used on the trail, as a small game gun, hunting backup, etc. These folks have great stuff and great service, too.

May 22nd, 2009, 10:03 AM	#9
djturnz Member Join Date: Jun 2006 Location: Pennsylvania Posts: 258	Do "speed strips" work well with single action revolvers? I'd imagine the end round would go in easily, but I'm not sure about after that. Maybe not enough clearance. How well would the pouches work as a "dump pouch" for loose rounds? __________________ I like my solvent and my lubricant for my guns to rhyme, so I use Gasoline and Vasoline. From Pennsylvania? www.pafoa.org

May 22nd, 2009, 11:28 AM	#10
Stephen A. Camp Member Join Date: Aug 2005 Location: Texas Posts: 460	I have not tried them with single-action revolvers so I cannot answer on that. The pouches do work as dump pouches. Best. __________________ Drop by www.hipowersandhandguns.com and http://hipowers-handguns.blogspot.com/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode