|
|
|
|||||||
| Register | Forum Rules | FAQ | Members List | Calendar | Mark Forums Read |
| Forum Donations | DefensiveCarry Store | DefensiveCarry Gallery | USGO Gallery | Related Links | Forum Help & Extras |
| Reloading DefensiveCarry.com accepts no liability for reloading information posted by members. It is down to the individual posting to ensure safe standards and to readers to verify what they read - it is they finally who bear responsibility for useage of information. Remember - typos can occur! We strongly recommend that in most cases quoted loads be derived from recognized loading manuals and if possible these should be referenced. Where loads do not have back-up reference data available, for instance with use of an unusual powder, then posters are asked to please detail their method for establishing their data. Irresponsible publishing of unsubstantiated ''guestimated'' data is deprecated and may be heavily moderated. |
 |
|
|
Thread Tools | Display Modes |
May 10th, 2008, 04:20 PM
|
#1 |
|
Member
 
Join Date: Oct 2007
Location: Fort Richardson,Alaska
Posts: 183
 |
what do I need?
ok.. im going to buy me a DMPS in .308. what do i need to buy to reload it? case prep. I have a 550B press, I have all the stuff to reload hand gun loads. I like the set-up i seen on shooting USA. but i dont know what i need.. I know that it is a RCBS case prep center. but that is about it. thanks for all your help.
|
|
|
June 1st, 2008, 03:50 AM
|
#2 |
|
Member
 
Join Date: Mar 2008
Location: michigan
Posts: 18
|
i dont know anything about the rcbs but i use lee and know with a rifle cartridge you must trim the case, chamfer, and debur the case. i use lee trimming tools and a rcbs chamfer and debur tool. the rcbs case prep center is more expensive then lee hand tools but i dont know if it is worth it. the lee tool has a length gage on it so you just turn till it stops taking metal off then turn the chamfer tool a few times then the debur side.
|
|
|
|
June 1st, 2008, 03:59 AM
|
#3 |
|
Moderator
 
Join Date: Dec 2004
Location: Arkansas
Posts: 5,184
 |
If you reload .45, then you already have the shell plate and the pins.
You'll also need a powder funnel for the .308.
__________________
AR. CHL Instr. To achieve world government, it is necessary to remove from the minds of men, their individualism, loyalty to family traditions, national patriotism, and religious dogmas.' Dr. G. Brock Chisolm |
|
|
|
June 1st, 2008, 07:49 AM
|
#4 |
|
VIP Member
 
Join Date: Dec 2007
Location: crawford county, arkansas
Posts: 5,206
|
Chamber OAL gauge with modified case, case trimmer, primer pocket uniformer, reamer, primer pocket brush, case lube, etc.... I use Lee Original loaders and all the RCBS accessories as well as some Forster items like the headspace gauges and neck turning tool. Mitutoyo calipers, one dial and one digital. Get some new brass from Midway or others--100 pieces to start, a few different primers like Federal, Winchester, and Remington in large rifle. Get the current load book for the .308 Winchester also.
__________________
RamRod-----sans remords |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
