|
|
|
|||||||
| Register | Forum Rules | FAQ | Members List | Calendar | Mark Forums Read |
| Forum Donations | DefensiveCarry Store | DefensiveCarry Gallery | USGO Gallery | Related Links | Forum Help & Extras |
| Reloading DefensiveCarry.com accepts no liability for reloading information posted by members. It is down to the individual posting to ensure safe standards and to readers to verify what they read - it is they finally who bear responsibility for useage of information. Remember - typos can occur! We strongly recommend that in most cases quoted loads be derived from recognized loading manuals and if possible these should be referenced. Where loads do not have back-up reference data available, for instance with use of an unusual powder, then posters are asked to please detail their method for establishing their data. Irresponsible publishing of unsubstantiated ''guestimated'' data is deprecated and may be heavily moderated. |
 |
|
|
Thread Tools | Display Modes |
August 20th, 2008, 08:45 PM
|
#1 |
|
Member
 
Join Date: Apr 2005
Location: Texas
Posts: 248
 |
10 mm loads for a Glock 29
I am going to start loading for my G-29. I have played with 8-9.5 gns of Power Pistol behind a Hornady 155 XTP. Accuracy is ok. I was wondering if any one else loads for this particlar pistol[meaning short barrell vs. long barrell].What recipie worked for you?
__________________
A armed person is a citizen-An unarmed person is a future victim. |
|
|
|
August 21st, 2008, 03:06 PM
|
#2 |
|
Senior Member
 
Join Date: Jun 2007
Location: Duisburg, Germany
Posts: 630
|
Not yet, but when I get around to justifying the expense of buying the dies and supplies for this caliber with my now small amount of disposable income I will let you know and we can exchange notes!
I carry Hornady 200 gr HP and feel confident with that for CC and sometimes Buffalo Bore when at the range ;)
__________________
If the 2nd Amendment was defined and broadly implemented as the 1st, 4th and 5th Amendments, it would be required for you to have a gun 
|
|
|
|
|
August 23rd, 2008, 09:13 PM
|
#3 |
|
Member
Join Date: Apr 2005
Location: Texas
Posts: 248
|
Sounds like a plan. I have been using the 175 Winchester STHP. Mostly because it was all i could find.
__________________
A armed person is a citizen-An unarmed person is a future victim. |
|
|
|
|
August 24th, 2008, 02:41 AM
|
#4 |
|
Senior Member
Join Date: Jun 2007
Location: Duisburg, Germany
Posts: 630
|
Well, my idea with the 10mm is that I need a really heavy HP because I don't want the bullet to just go straight through, doing nothing. If there were 300 Grn slugs for the 10mm I'd CC them.
__________________
If the 2nd Amendment was defined and broadly implemented as the 1st, 4th and 5th Amendments, it would be required for you to have a gun
|
|
|
|
|
September 9th, 2008, 03:09 AM
|
#5 |
|
Distinguished Member
 
Join Date: May 2005
Location: In the reloading room
Posts: 1,988
|
9.2gr Longshot with a 180gr JHP is a sweet shooter. 9.5gr is MAX with Hodgdon date.
#9 is fun. 15.9gr is MAX with a 155gr bullet. 6gr WSF is a very good shooter. Scary accurate. 6.5gr is MAX. 12.5gr Blue Dot with a 155gr XTP is a great load. 12.9gr is MAX. 9.4gr (MAX load-Hodgdon) with a 180gr bullet is very controllable and clean. 800X is very fun with 10mm. You will need to weight each charge by hand because it meters in a PM poorly. |
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
