Defensive Carry banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1,746 Posts
Discussion Starter #1
I found this article by Grant Cunningham on lubricating your firearm, very interesting read. Thought you all would enjoy it.

Lubrication 101
 

·
Registered
Joined
·
15,177 Posts
If anybody can find the Lubriplate,even if only in 35# buckets,maybe they could break it down and sell 1# containers to members as long as it's not too cost prohibitive with S&H
 

·
Registered
Joined
·
895 Posts
last time i cleaned and lubed my handgun,i used my own recipe..seems to work just as good as all the expensive gun lubes out there..you can also use different variations of this formula.

(1) part dexron ATF fluid
(1) part STP oil treatment
(2) parts Mobil 1,full synthetic
 

·
Registered
Joined
·
1,271 Posts
I've been going with straight up Mobil1 for a while now, but I might try that recipe of yours, crue.
 

·
Registered
Joined
·
4,469 Posts
ATF, I would have never guessed.

LubriPlate should be found at most restaurant supply/equipment stores.
 

·
Registered
Joined
·
15,177 Posts
ATF, I would have never guessed.

LubriPlate should be found at most restaurant supply/equipment stores.
I'll look some up,still use gunzilla fer cleaning tho
 

·
Registered
Joined
·
2,198 Posts
Mr. Cunningham's article mentioned NLGI #0 as being ideal. If you go to the Lubriplate web site, they are selling No.105 Motor Assembly Grease NGLI #0, in 10 oz. tubes for 17.60.
 

·
Registered
Joined
·
425 Posts
Huh, I didnt know many people knew about Grant. My buddy carries that Model 66 in the picture on his site. Grant does some great work.
 
1 - 8 of 8 Posts
Top