Defensive Carry banner
1 - 4 of 15 Posts

· Registered
Joined
·
115 Posts
Discussion Starter · #1 ·
I have a Russian SKS with the numbers matching, except someone replaced the reciever housing with one of those scope mounts (see pictures)



Basically using a Red-Dot at 50 ft. it sprays a non-sensical array of bullets in 12" diameter, At 50 yds I am lucky to get more than one in 10 on an 18"x18" target. I have been trying to get an original reciever cover so I can try the Iron sights (see second pic) My thought is that the reciever housing itself is moving - but maybe I should expect this from an old SKS.

It could be my shooting I guess, cause I am no trained marksman but my only other rifle is a 10/22 and I can shoot groups with that and only iron sights at 50 and 100 yds. I'm kind of fed up with this rifle after wasting money on different scopes, lots of different ammo etc...

Should I just get rid of it?
 

· Registered
Joined
·
115 Posts
Discussion Starter · #5 ·
roadrash said:
Is it dinged up at all?


Thats the dangerous end - The rifling does look worn also and they obviously used corrosive ammo in this at some point.
Do any of you know where to get a plain reciever cover (without the mount) all I can find is mount covers identical to what you find in Cheaper than Dirt.

paknheat said:
I would have your sks inspected by a gunsmith before you get rid of it
Also I took it to the local gunstore (where I bought it incidentally) and they have a gunsmith - they refused to look at it - Apparently AKs and SKSs are throw away guns. Still looking for someone around here that I can count on.

P95Carry - Nice gun
 

· Registered
Joined
·
115 Posts
Discussion Starter · #10 ·
roadrash said:
Hate to tell ya bro,but that bore is shot!
...
Stick a live round, bullet first into the end of the muzzle,I would be willing to bet you can insert it till it bottoms out on the mouth of the case!
I just tried what you suggest, the case is sitting about 1mm from the end of the barrel, but it does "wobble" side to side in one direction.
As for the bore being shot, I'm willing to accept that if it is, thats why I want to know if I should just get rid of it.

OldDawg - thanks for the link
 
1 - 4 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top