Defensive Carry banner
1 - 9 of 9 Posts

·
Registered
Joined
·
100 Posts
Discussion Starter · #1 ·
Dan Wesson / CZ: Pointman 7 - Stainless .45






























'Before' Pic:





Specs:
· Stainless Steel Frame and Forged Stainless Steel Slide
· Forged, one piece match grade barrel and bushing
· Round top slide with Bo-Mar style adjustable target sight
· Hand polished flat surfaces with contrasting bead blasted rounds
· Flat, all steel 20-LPI checkered mainspring housing
· Front and rear cocking serrations
· Beveled magwell
· All sharp edges dehorned by hand
· Lowered and flared ejection port
· Hand polished feed ramp
· Ed Brown slide stop
· Ed Brown memory groove grip safety
· Tactical extended thumb safety
· One piece full length stainless guide rod
· Commander style match hammer
· Match grade sear
· Aluminum trigger with stainless bow
· Extended serrated magazine catch
· Wolff springs used exclusively
· Diamond checkered coco-bolo grips (Replaced by Carbon Creations Ultra-Thin Grips)
· Tuned, machined, internal extractor
· LaserMax Internal Laser Sight
· Carried in a Milt Sparks Versa-Max II


Future Mods:
· Front Strap Checkered
· Custom adjustable rear sight that is shaped and beveled like a Novak, with tritium inserts and matching tritium front sight
· Polished to a mirror finish
 

·
Registered
Joined
·
100 Posts
Discussion Starter · #18 ·
Thanks for the welcome and kind words guys. I think I'm going to like it around here, lots of great info.

Yes, the CZ in the serial number is the only trace I've seen of CZ, other than that, pure DW. In fact if you call CZ and ask about these guns, they'll give you DW's phone number and tell you to call them.

The CZ models seem to have a few more features than the pre-CZ DW's did, like the beveled mag well.

Will post a range report as soon as I get the chance. Taking my CCW course Saturday!
 

·
Registered
Joined
·
100 Posts
Discussion Starter · #22 ·
The only downside (that I'm aware of) to an adjustable sight is the possibility of snagging. Unfortunately, no one makes a setup to convert from Bo-mar cut adjustable sights, back to fixed, low-mount, combat sights. So, I'm going to have a custom rear sight made, that will still be adjustable, but will be shaped and beveled like a Novak, and with tritium inserts.

So they will be similar to the new Novak Extreme Duty night sights, but for a Bo-mar cut. The Extreme Duty Novaks won't fit a Bo-mar cut. That amazes me, that Novak doesn't make a 'cross-over' type sight, one of their sights, that will fit a Bo-mar cut. Heaven forbid they attact a new customer, converting from another competing brand. Champion makes several of their normal Bo-mar type adjustables, and they are now making some Novak looking adjustable sights...but those only fit a Novak cut? So why not just buy the Novak Adjustables? Why don't they make an adjustable sight, that looks like a Novak, but fits a Bo-mar?

So, I'm left to make a custom setup. But the end result will be very similar to the Novaks, eliminating the snagging possibility, with the benefits of adjustability and tritium inserts. Best of both worlds...

Isn't the CBOB a 4.25" barrel? Or something shorter than a 5"? I wanted a full size.

I have talked to several people who 'carry' guns with adjustable sights though, without issues. But I'd prefer to have a sight shaped like a Novak though, just to reduce the snagging possibility.

I'll be using a Milt Sparks Versa-Max II for a holster, don't know which belt yet. Will also have a LaserMax internal laser sight.
 

·
Registered
Joined
·
100 Posts
Discussion Starter · #26 ·
Thanks Ti. I'll check out Yost/Bonitz.

I just read that review, sounds very good to me, he didn't even clean it before shooting it the first time. From what I've read about these guns and the hours I've held it in my hands, inspecting and admiring it, I can tell its a fine 1911. The fit and finish are outstanding. I haven't gotten to shoot it yet, but plan to put a couple hundred through it Saturday after my CCW course.

As far as differences between the one he reviewed (Patriot) and mine, mine has an internal extractor, a one piece, stainless full-lentgth guide rod instead of a two-piece, and most of my 'aftermarket' parts are Ed Brown instead of the McCormick units used on that Patriot. My grip screws are allen-head type and the factory magazine is a 7-rounder.

I'm with you, I prefer the night sights also since statistically it seems that if the SHTF it will most likely be at night. I want to try and get some white rings around the tritium inserts to aid in daylight shooting also.

I just really like this gun and don't want to pick something else just because of the sights.
 

·
Registered
Joined
·
100 Posts
Discussion Starter · #28 ·
Range Report: Excellent!

I was scheduled to take my CCW course Saturday, so Friday evening I cleaned the gun as I had never had it apart.

My son went with me to the course, sat in the lobby/lounge/showroom during the course and played his PSP. I took my CCW course, but instead of going to eat during the lunch break, I stayed and my son and I shot. He rented a glock, don't remember the model, it was a full size 9mm. He picks different guns every time he goes, usually 9mm, he just turned 12 a few days ago.

I figured this would at least let me pump a few rounds through it, check the sights, etc., before I took my qualification shots. I shot four 7-round clips of WWB FMJ through it, flawless. It was shooting a little low, 3 clicks up on the adjustable sights fixed it.

My turn to shoot came immediately after the lunch break, 50 more rounds, ten 5-round clips.

After the class, my son rented a different gun, a full size stainless Springfield 1911, possibly a 'loaded', also a 9mm, and we shot some more. In total, I shot 200 WWB FMJ's, and then 50 WWB JHP's through it. It was outstanding, not a single problem, shot like a dream. I LOVE this gun!
 

·
Registered
Joined
·
100 Posts
Discussion Starter · #30 ·
Yes, my son is a big reason I got into this. He's played counter-strike (video game) for a while now and has always been fascinated by guns. I knew this would be something we could enjoy together, so he always goes with me to the range and we go to gun shows together. Once I learn to re-load and he gets a little older, he'll probably help me with that too.

We're not sure what we'll pick for his first handgun, thats why he trys a different gun each time we go to the range. It would be cool if we could compete together. He's shot a Remingon .22, two different 1911's in 9mm, an H&K USP 9mm and a Glock 9mm. He wants to try a Beretta, but hasn't gotten to shoot one yet, the range doesn't have any of those for rental. I don't care for them, but its not for me. But I think 1911's are his favorite (he's a pretty smart boy!). Now he thinks daddy should have an AR-15. ;)
 

·
Registered
Joined
·
100 Posts
Discussion Starter · #32 ·
I haven't shot one since '87 (M16), so its been a LONG time. He's never shot one. I want one REAL bad. But I don't know much about them. I don't want to spend a fortune on it, nothing from Les Baer. So I'm trying to find a nice, decent rig that will be dependable/reliable, and I can upgrade over time. I'm not sure which brand or caliber to go with. Several have told me to go with something larger than the .223, but I don't know what the drawbacks would be. I'm sure it will limit the interchange of parts, but that may not be a real issue.

I want one with the quad-rail, A3 flat-top with removable handle, 6-position stock, some type of optics, backup iron sights, etc. I probably won't get all of that stuff to start with, but would like a good foundation to build on.

I don't know which brands to consider. I've heard good things about Rock River and Bushmaster, but I still know VERY little about all of this.
 
1 - 9 of 9 Posts
Top