[Freedomofchoice]

Need to do a powder run and I've been thinking of experimenting with some Power Pistol.

For those who use it:
Can it be used for light and medium loads as well as heavier loads in 9mm, 40S&W, and 45 ACP?

Does it meter well?

Does it only work well with heavier bullets?

Thanks.

.

 

[Majorlk]

I don't know, but the company's reloading data should answer your questions.

 

[bpw]

I have loaded all three calibers with Power Pistol. It meters fine in my Dillon 550.

In .45 with a 230gr FMJ I have loaded 5.6 to 8grains.

In .40SW I have loaded 5.5 to 7.6gr with 165 and 180gr bullets

In 9mm with 115gr JHP I have loaded 4.8 to 6.3grains.

In 9mm 147 Plated I have loaded 4.6 to 5grains

Muzzle flash can be impressive in the .45 ACP. I don't have a chronograph.

As stated above, carefully reading published data and choosing appropriate loads based on bullet type is very important for safety.
b

 

[Bigbuck5]

If you visit the Alliant Powder web site you can download the data. It meters well for me also. I just looked at the manual, the information you're looking for is on pp. 34-36.