[ThumperACC]

Hi All,

I am seriously considering a Sig P250 subcompact for my concealed 9mm carry piece. However I've looked around a bit and I can only find one vendor who explicitly supports the subcompact 250 and that is high noon holsters.

Those of you who own/carry one, what are you using? (Pics would be greatly appreciated)

Thanks,
ThumperACC

 

[Ananael]

I'm following you around the forum, it seems! :smile: (Just replied to your post in carry guns...)

If you check the pics and dimensions on the sig site carefully, you'll find that the 250sc and the 239 are exactly the same design with two exceptions: the 250sc is .1 inches slimmer, and the grip is shorter. This means you can pretty much use any holster designed for a 239. :image035:

 

[ThumperACC]

If you check the pics and dimensions on the sig site carefully, you'll find that the 250sc and the 239 are exactly the same design with two exceptions: the 250sc is .1 inches slimmer, and the grip is shorter. This means you can pretty much use any holster designed for a 239. :image035:

Good info, thanks.

ThumperACC

 

[cfiore99]

I'm following you around the forum, it seems! :smile: (Just replied to your post in carry guns...)

If you check the pics and dimensions on the sig site carefully, you'll find that the 250sc and the 239 are exactly the same design with two exceptions: the 250sc is .1 inches slimmer, and the grip is shorter. This means you can pretty much use any holster designed for a 239. :image035:

Unfortunately this is incorrect. I own both a P239 & a P250 Subcompact. I have a TT Gunleather, Versa Max II & MTAC all for my 239 and my 250 Subcompact will not fit in any of them. Still looking for a holster for my 250 Subcompact. :frown:

 

[mel5051]

If it isn't the rounded trigger guard version, CrossBreed makes em

 

[cammo]

This is why I am seriously considering a Glock. So many accessory choices.

Those Sig 250 rigs are hard to come by (and check them out after purchasing, we've experienced labels that say Sig P250 but no cigar).

 

[Ananael]

I got 2 DeSantis holsters for the 239 and they fit my 250 subcompact snug and fine. Weird. :sad6:

 

[cfiore99]

I got 2 DeSantis holsters for the 239 and they fit my 250 subcompact snug and fine. Weird. :sad6:

Which DeSantis holsters are they exactly, because I need them. I cannot find anything for my Subcomapct 250. Were they for a .40 239 or a 9mm 239?

Thanks Ananael.

 

[ThumperACC]

Unfortunately this is incorrect. I own both a P239 & a P250 Subcompact. I have a TT Gunleather, Versa Max II & MTAC all for my 239 and my 250 Subcompact will not fit in any of them. Still looking for a holster for my 250 Subcompact. :frown:

I'm interested to know in which way they do not fit. Is it length? Thickness? Height from top of slide to bottom of trigger guard? Something else?

Thanks,
ThumperACC

 

[Ananael]

Nemesis and Dual Carry for P239. Dual Carry is tight, real tight, requires break in, but works. Nemesis fits like a dream. DeSantis doesn't ask caliber 239.

Here you go:
Dual Carry

Nemesis

 

[Ananael]

It also appears High Noon has the Split Decision for the 250sc specifically as a stocking item.

 

[rstrainii]

Desantis makes a holster for the 250 as that is who supplies the Federal Air Marshals and they are carrying 250s.

 

[Avenger]

This is why I am seriously considering a Glock. So many accessory choices.

Those Sig 250 rigs are hard to come by (and check them out after purchasing, we've experienced labels that say Sig P250 but no cigar).

NO! Dont go to those extremes! :aargh4: You just dont know where to look!:blink:

Look at Pure Kustom Holsters. Rocky can make any holster for any firearm. Just call him up ask about it and I am sure he will come up with something. He is a total custom holster maker who makes the worlds finest holsters. Best craftsmanship matched only by HIS artwork! No need to buy a GLOCK just because its more of a challenge to find what you are looking for! Glock sucks, IMO of course!

 

[AdamSean]

I had a hard time finding a holster too. I went with a Galco Tuck-N-Go. I got the one that fit a Glock 26/27. It waa a bit snug at first, but after a wwek of carrying, formed nicely. I can tuck in my shirt or use it as a simple IWB.

 

[AdamSean]

I almost forgot about this. I had a Blackhawk Serpa paddle holster for my Springfield XD9 sc. I took a dremel to cut the length down a bit. It fits perfectly!

 

[PressureDrop]

I just ordered a P250 2SUM kit and I am going to be searching out my best options for the sub setup and the standard. For the subcompcact it will be nothing but concealed, sometimes deep. For the standard will be almost 100% Truck / Car duty (I already use my P220 or my P226 for open or light concealed, so the standard P250 rig is not really going to be an issue). I will keep my eyes on this thread and update with my findings if worthwhile


-Zac-

 

[gtifreak04]

Crossbreed does a Supertuck for it as well. Would be a nice setup for that gun.

 

[Endlessummer]

But what about a Lefty?

I am looking for a IWB for a lefty Sig P250 SUBcompact...any ideas?

 

[PressureDrop]

It also appears High Noon has the Split Decision for the 250sc specifically as a stocking item.

I liked the looks of this so I ordered one. We shall see how it works when it arrives!

Here is where I posted about my 2sum:
http://www.defensivecarry.com/vbulletin/defensive-carry-guns/102549-p250.html

 

[PressureDrop]

So I am using this daily and like it a lot! :hand56: